Used Injection Molding

2000 618 Ton Nissei FV9000-310L Injection Molding machine

• Manufacturer: Nissei
• Model: FV9000-310L

2000 618 Ton Nissei FV9000-310L Shot size: 132.8 Oz Screw size: 100 mm Tie bar spacing: 38.2" x 38.2" Platen size: 53.5" x 53.5" Max. Open daylight: 71.3" Hours: 31489 Machine is in good running conditions...

2008 UBE Ultima UN500/59E Injection Molding Machine

• Manufacturer: UBE Industries

New in 2008 UBE Ultima UN500/59E All Electric Machine Tonnage: 505 Shot size: 56.5 Oz Screw diameter: 82 mm Tie bar spacing: 31.9" x 31.9" Platen Size: 45.7" x 45.7" Max. Open daylight: 61" Location: USA.

2005 310 Ton Toshiba ISGS310W-V21-19 Injection Molding machine

• Manufacturer: Toshiba
• Model: ISGS310

2005 310 Ton Toshiba ISGS310W-V21-19: Shot size: 41 Oz Screw size: 70 mm Tie bar spacing: 25.2" x 24" Platen size: 36.6" x 35.4" Max. Open daylight: 41.7" Control: Injectvisor V21 Weight: 27,300 lbs Dimen...

2006 150 Ton TOYO ET-150HR2 All Electric Vertical Injection Molding Machine

• Manufacturer: Toyo

All electric 2006 150 Ton Toyo ET-150HR2 Vertical Injection molding machine: Rotary table size 65” Two Station. Horizontal injection Shot size: 6.69 Oz Screw size: 40 mm Platen size: 22" x 22" Machine is i...

2003 390 Ton Toshiba ISGS390V21-19 Injection Molding machine

• Manufacturer: Toshiba
• Model: ISGS390V

2003 390 Ton Toshiba ISGS390V21-19 Shot size: 41 Oz Screw size: 70 mm Tie bar spacing: 28.7" x 28.7" Platen size: 40.1" x 40.1" Max. Open daylight: 49.2" Control: Injectvisor V21 Hours: 42,040 Weight: 34,...

2004 950 Ton Toshiba ISGT950WV21-81AT Injection Molding machine

• Manufacturer: Toshiba
• Model: ISGT950WV

2004 950 Ton Toshiba ISGT950WV21-81AT Shot size: 142 Oz Screw size: 105 mm Tie bar spacing: 61" x 49.8" Platen size: 79.5" x 68.3" Max. Open daylight: 88.5" Control: Injectvisor V21 Weight: 101,000 lbs Di...

2013 500 Ton Toshiba ISGS500W-V50-27AT Injection Molding machine

• Manufacturer: Toshiba
• Model: ISGS500W

2013 500 Ton Toshiba ISGS500W-V50-27AT Shot size: 48 Oz Screw size: 70 mm Tie bar spacing: 34.2" x 31.8" Platen size: 48.4" x 45.6" Max. Open daylight: 55.1" Control: Injectvisor V50 Hours: 48,072 Weight:...

2004 250 Ton Toshiba ISG250N-V21-10B Injection Molding machine

• Manufacturer: Toshiba
• Model: ISG250

2004 250 Ton Toshiba ISG250N-V21-10B Shot size: 19 Oz Screw size: 55 mm Tie bar spacing: 24" x 22" Platen size: 34.2" x 32.2" Max. Open daylight: 41.7" Control: Injectvisor V21 Weight: 18,900 lbs Dimensio...

2008 720 Ton UBE Ultima UN720W/114E Electric Injection molding machine

• Manufacturer: UBE Industries
• Model: UN720W114E

New in 2008 UBE Ultima UN720W/114E All Electric Machine Tonnage: 720 Shot size: 119.4 Oz Screw diameter: 100 mm Tie bar spacing: 37.4" x 37.4" Platen Size: 54.72" x 54.72" Max. Open daylight: 78.74" 4 hyd...

Newbury Industries 30 Ton Injection Molding Press

2 units available! Newbury Industries 30 Ton Injection Molding Press Model V3-30RS 2 units available Both came out of service working 3 Phase 60Hz 460 V Weight approx. 6500 lbs Sold as-is where-is

Husky H-C6-1-NEO2-8 Altanium Neo2 Injection Molding System

• Manufacturer: Husky

“Used” Model number: H-C6-1-NEO2-8 | Model line: ALTANIUM NEO2 | Mpn: H-C6-1-NEO2-8 | Shipping weight: 320 lbs | Shipping dimensions: 64 x 39 x 27 in | Reference sku: 928955

TTC2100 GAMMAFLUX "TTC-33457" GLOBAL HOT RUNNER TEMPERATURE SEQUENTIAL VALVE GATE CONTROLLER FOR PLASTIC INJECTION MOLDING MACHINE

• Manufacturer: Gammaflux

TTC2100 GAMMAFLUX "TTC-33457" GLOBAL HOT RUNNER SEQUENTIAL VALVE GATE CONTROLER FOR PLASTIC INJECTION MOLDING MACHINE - (8) valve gate outputs - 4- thermocouple power cords - touch screen computer - portable desi...

STERLCO M29412-GCX Sterltronic Thermolator Injection Mold Temp. Controller

• Manufacturer: Sterlco

Used STERLCO M29412-GCX Temperature Control available. Enhance your system with this reliable model. Optimize management with proven industry performance. Ideal for those seeking trusted quality in used condition.