Used Processing in Hiroshima, Japan

Multitubular heat exchanger
- used
2 passes. Since there is no documentation, the heat transfer area cannot be determined without removing the mirror and investigating the diameter x number x length of tubes.
Hiroshima, Japan
Multi-tube heat exchanger, vertical type
- used
Heat transfer area: 4.7 m2 Tube: inner diameter 30mm, length 1240mm Number of tubes: 40 tubes, 400φ, single mirror SUS Heat transfer area: 4.7 m2
Hiroshima, Japan
1998 Hisaka Manufacturing UX-016A-KNJR-8
- used
- Manufacturer: Hisaka Seisakusho
Heat transfer area: 0.5m2 Material: Wetted part SUS | Quantity saved: Two
Hiroshima, Japan
1991 Carbon capacitor
- used
Heat resistance temperature: 360°C Withstand pressure: 0.5MPa(75PSIG) Heat Transfer Area: Unknown (Approx. 10㎡ based on size)
Hiroshima, Japan
［Carbon capacitor No model
- used
Heat transfer area: Unknown (about 10 square meters based on the size). Other: Unknown (because there is no nameplate).
Hiroshima, Japan
SSC RC456SK-42-9
- used
- Manufacturer: SEC
Cubic type Heat transfer area: 1.12 m2 Material: carbon | Quantity saved: One
Hiroshima, Japan
2007 Seiko Kako FTF 803-LH2-S
- used
- Manufacturer: Seiko Kakoko
Air volume: 1100 m3/min Static pressure: 2.4 kpa Suction port diameter: 1200 mm Restricted gas temperature: 80°C
Hiroshima, Japan
1985 Muto Electric Corporation MLD-1003 (300) M
- used
- Manufacturer: Muto Electric
11kw, 12m3/min Airflow: 12m3/min Static pressure: -1000mmAq
Hiroshima, Japan
1988 Nishimura Electric Corporation SM-560
- used
- Manufacturer: Nishimura Electric
7.4kw, 2.2m3/min Air volume: 2.2m3/min Static pressure: 5900/7400mmAq
Hiroshima, Japan
1989 Hachiozo Manufacturing Co. CF-115-BVL
- used
- Manufacturer: Hachiozo Seisakusho
3.7kw4p220v Air volume: 65m3/min Air pressure: 150mmAq Rotation speed: 1730rpm
Hiroshima, Japan
Zao Sangyo Scrub Mate Mini 360B
- used
- Manufacturer: Zao Sangyo
Power: 250 W | Quantity saved: One
Hiroshima, Japan
Toyohiko Kogyo TP63-B5-D
- used
- Manufacturer: Toyohiko Kogyo
Discharge pressure: 14 Mpa (MAX) Discharge rate: 5 to 26 L / min Oil tank: 63L Oil pump: HPP-VB2V-F8A5 With oil cooler
Hiroshima, Japan
2000 Yasunaga YN 5039
- used
- Manufacturer: Yasunaga
Volume generated: 99.9% purity, 0.55 mPa 3.4 Nm3/h Operating hours: 11930.8 hours, compressor (scroll 2.2kw) built-in Complete books and instruction manuals available
Hiroshima, Japan
［Mitsubishi] Geared motor 3.7kw4p200V
- used
- Manufacturer: Mitsubishi
Unused 3.7kw4p reduction ratio 1/3 Power: 3.7kw4p200V | Quantity saved: One
Hiroshima, Japan
［Hitachi] Motor 30kw 4p200V
- used
- Manufacturer: Hitachi
Unused General-purpose motors Power: 30kw4p200V | Quantity saved: One
Hiroshima, Japan