Used Energy in Aragon, Spain

WARTSILA 18V32SG POWER PLANT

• Manufacturer: Wärtsilä
• Model: 18V32

Available complete natural gas power plant of a Wartsila 18V34SG. The engine stopped running at full load with all the maintenances done. The aeros for the cooling system are not included, only the exchangers. B...

Solar Gas turbine Taurus 65 SOLONOX

• Manufacturer: Solar
• Model: Taurus

Solar Gas turbine Taurus 65 SOLONOX The turbine and gear box is from 2022 and it only has 2000 running hours. The package is from year 2011. The condition is excellent and is ready to start working, in addition ...

Jenbacher 320 Power Plant

• Manufacturer: Jenbacher
• Model: 320

Available complete power plant of Jenbacher 320 with 72000 hours. Engine is from year 1998. At 42000 hours it was performed an overall, after that the schedule of maintence has been followed. It stopped runninf a...

WELDING EQUIPMENT ELECTRODE PRAXAIR A-262.1 06415

• Manufacturer: Praxair

NO. 06415 ELECTRODE WELDING ELECTRODE WELDING A - 262.1 Alternating Current (AC) Alternating Current (AC) Mobile Main technical characteristics Utilization factor 250 A at 35%. 190 A at 80%. 150 A at 100%. Dimens...

C. C. INDUSTRIAL RECTIFIER ELECTRONIC CONTROL GAR GALA GAR CONTINUOS 550 05624

• Manufacturer: GALA GAR

Ref 05624 Machine C.C. INDUSTRIAL RECTIFIER ELECTRONIC CONTROL GAR CONTINUOS 550 Main Technical Data Main voltage 230/400 V Maximum input power 24 KVA Amperage range 30 - 400 A Duty cycle 400 A / 60% Usable elect...

TRANSFORMER LAYBOX 630 KVA 07056

• Manufacturer: LAYBOX

Ref 07056 Machine TRANSFORMER Type 630 / 24 / 13.2 / B2-0-PA Main Technical Data Rated power 630 KVA Standard UNE RU-5201-C Year of manufacture Voltage Current Power 400 V 909,33 A 630 KVA Pos. Voltage Curre...

HEATING BIEMMEDUE SP-150 B 06790

• Manufacturer: BIEMMEDUE

174, 50013 Zaragoza (Spain) REF. 06790 Machine HEATING Brand BIEMMEDUE Model SP-150 B Industrial and vertical type Oil burner Main Technical Data Rated heat power 150.000 Kcal/h Power 174,4,8 kW Air flow 10-.000 ...

SCREW COMPRESSOR JOSVAL MISTRAL 30 A - AS "SOFT STARTER" 05577

• Manufacturer: JOSVAL

Ref 05577 Machine SCREW COMPRESSOR Brand JOSVAL Model MISTRAL 30 A - AS Type "SOFT STARTER Main Technical Data Power 30 HP. 22 kW Maximum working pressure 8 bar Flow rate 3.750 l/min 21,9 m³ / h Sound level 73 dB...

2016 Jenbacher 616 POWER PLANT

• Manufacturer: Jenbacher
• Model: 616

Available One complete Jenbacher 616 plant from 2016, with 33,000 operating hours. All maintenance has been performed by the official service. The engine has a power output of 2,679 kW and an electrical output v...

Recovery Boiler

• Manufacturer: Siat

Available two units of this SIAT RECOPACK recovery boiler. This boiler recovers the heat from the exhaust gases of turbines or engines, but it doesn't have burner to produce its own heat. They are disassembled an...

WELDING MIG INE MGE 200 INVERTER 06534

• Manufacturer: INE

Ref. 06534 WIRE WELDING WIRE WELDING MGE 200 Inverter MIG/MAG MMA Main technical characteristics Voltage 220 V Single phase (characteristics based on data sheet)

WELDING EQUIPEMENT ELECTRODE CEBORA ROD WELD 407 05830

• Manufacturer: Cebora

WELDING EQUIPMENT ELECTRODE ARGON D-350 05364

• Manufacturer: Argon

No. 05364 WELDING machine ELECTRODE Brand ARGON Model D-350 DC Main technical characteristics 320 A. 50% 300 A. to 60% 220 A. 100% (characteristics according to technical data sheet)

TRANSFOMER FOR COATED ELECTRODE WELDING GAR MINIGAR 200 05370

• Manufacturer: GAR

00174, 50013 Zaragoza (Spain) Ref 05370 Machine TRANSFORMER FOR COATED ELECTRODE WELDING MINI-GAR 200 Main Technical Data Input voltage U1 220/380 V Maximum input power 5,5 kW Power factor 0,6 No-load current 5 A...

TIG WELDING INVERTER TECNOMEC PULSER HF-170 06244

• Manufacturer: Tecnomec

REF 06244 Machine TIG WELDING INVERTER PULSER HF 170 Main Technical Data Power supply 230 Vac±15% Frequency 50 / 60 Hz Input supply (60% – 100%) 25 A – 16 A Maximum input power 5.7 KVA No load voltage...