Used Processing in Hiroshima, Japan

Tanabe AT-48
- Manufacturer: Tanabe
Wetted parts material: Cage part SUS316. Casing part: inner rubber lining / outer wall SS 48-inch fully automatic bottom discharge type. Capacity 225L Equipped with control panel and hydraulic unit. Low speed ope...
Hiroshima, Japan
2007 IHI IX-36T
- Manufacturer: IHI
Rotation speed 3150 rpm (centrifugal effect 2000G) Gearbox GT-2X (1/88) With soundproofing box Gross weight of main body 2300kg
Hiroshima, Japan
2007 Sekko Sangyo SSR150
- Manufacturer: Seikou Sangyo
18.6m3/min, 55kpa Power: 30kw | Purchasing area: 60Hz | Quantity saved: 3 units
Hiroshima, Japan
Tokuju V-150
- Manufacturer: Deoksary
Total capacity: 335L Stocking capacity: 150L Power: 1.5kw | Purchasing area: 50Hz | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
2600L SUS tank
Total capacity about 2610L (in nominal straight body dimensions). Bottom curvature shape, bottom discharge type. *No data available for exact capacity. With jacket (material SS/used for steam). With mixer (0.4Kw ...
Hiroshima, Japan
1990 Hosokawa Micron DBX-1000RMW
- Manufacturer: Hosokawa
Mixing capacity 1000L Motor: 3.7Kw for rotation (explosion-proof) / 0.4Kw for revolution (explosion-proof) Rotation speed: 55RPM for rotation/ 1.6RPM for revolution Design withstand pressure: FV Jacket: 1.9Kg/cm²...
Hiroshima, Japan
2100L SUS tank
Total capacity approx. 2100L (rough cylindrical body dimensions). Bottom conical shape, bottom-pull type. *No data available, exact capacity unknown. Jacketed (material SS/used with steam). Mixing device included...
Hiroshima, Japan
1996 Tomoe Kogyo AS16V
- Manufacturer: Tomoe kogyo
Two-phase separation Rotation speed: 15,000 rpm Starting board and disassembly tools are available. Two units of the same type are owned, and there is a spare rotor for one unit. Click here to see a video of the ...
Hiroshima, Japan
1988 Tanabe AUT - 42
- Manufacturer: Tanabe
42" SUS316 Fully automatic bottom discharge type, hydraulically driven. No control panel. Hydraulic drive has been converted to motor drive.
Hiroshima, Japan
Tokuju Kosakusho V-200
- Manufacturer: Tokuju Corporation
200L in stock / Total capacity 475L External dimensions: 2500 x 800 x 1950H (mm) Weight: approx. 700kg
Hiroshima, Japan
2012 [Kyoritsu] Upper discharge type *Maintained
- Manufacturer: Kyoritsu Seisakusho
18" top discharge type.　　1.800 rpm. Serviced and test run verified. Click here to see a video of the trial run (YouTube) upon completion of maintenance.
Hiroshima, Japan
1992 Tomoe Kogyo AS16V
- Manufacturer: Tomoe kogyo
Two-phase separation Rotation speed: 15,000 rpm Starting board and disassembly tools are available. Two units of the same type are owned and there is a spare rotor for one unit. Click here to view a video of a tr...
Hiroshima, Japan
Alfa Laval BRPX413XGD-14-60
- Manufacturer: Alfa-Laval
- Model: BRPX
concentrator Power: 30kw | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
Tanabe Wiltech Z2L-3LV
- Manufacturer: Tanabe Wiltech
5000rpm/4400G Nominal capacity: 3-5 m3/h New motor will be installed at the time of servicing
Hiroshima, Japan
2003 Okawara Kakoki L-8
- Manufacturer: Okawara Kako Kikai Kikai
Moisture evaporation capacity: 3kg/h Hot air inlet temperature: 250°C, exhaust air outlet temperature: 100°C Disk atomization, parallel flow method Atomizer model: OCA-008B Collection method: Single point collect...
Hiroshima, Japan