Test, Lab, Medical equipment » Laboratory Ovens » Muffle Furnaces » Australia

Building Filters

24

Used Muffle Furnaces in Australia

Carbolite CWF 11/23
- used
- Manufacturer: Carbolite
Furnace PID control to 1200C 7.4kW 415/240V 11A chamber size 230 x 240 x 400mm cantilever door
Artarmon, Australia
Vita Vacumat 40
- used
Porcelain vacuum furnace for dental applications programmable to 1200C including KNF dual head vacuum pump
Artarmon, Australia
FURNACE MUFFLE
- new
LHTCT 01/16 WITH LIFT DOOR 1.5L UP TO 1550 DEGREES CELSIUS C550 CONTROLLER ID 110 X 120 X120mm OD 340 X 300 X 460mm SINGLE PHASE AUSTRALIAN PLUG (LC014H6ON1)
Minto, Australia
FURNACE MUFFLE ASHING WITH LIFT DOOR
- new
B510 CONTROLLER 1100C 3L CAPACITY INT DIM 180mmW 150mmD 120mmH 1.2kW INCLUDES FRESH AIR INLET & EXHAUST SYSTEM (LV035H11NL)
Minto, Australia
FURNACE MUFFLE
- new
BASIC 'LE' MODEL WITH FLAP DOOR EXHAUST OUTLET AT FURNACE REAR BASIC R7 CONTROLLER NON-CLASSIFIED FIBRE INSULATION UP TO 1100C MAX BUT WORKING TEMP 1050C 6L CAPACITY 230V 7.8A (LE 6/11/R7) These compact muffle fu...
Minto, Australia
FURNACE MUFFLE
- new
BASIC 'LE' MODEL WITH FLAP DOOR EXHAUST OUTLET AT FURNACE REAR BASIC R7 CONTROLLER NON-CLASSIFIED FIBRE INSULATION UP TO 1100C MAX BUT WORKING TEMP 1050C 14L CAPACITY 230V/12.6A (LE 14/11/R7) These compact muffle...
Minto, Australia
FURNACE
- new
MUFFLE BASIC 'LE' MODEL WITH FLAP DOOR EXHAUST OUTLET AT FURNACE REAR BASIC R7 CONTROLLER NON-CLASSIFIED FIBRE INSULATION UP TO 1100C MAX BUT MAX WORKING TEMP 1050C 2L CAPACITY 230V. (LE 2/11/R7)
Minto, Australia
FURNACE MUFFLE
- new
L15/12 WITH FLAP DOOR AND ADJUSTABLE AIR INLET EXHAUST OUTLET AT FURNACE REAR B510 CONTROLLER WITH DATALOG CAPABILITY UP TO 1200C 15L CAPACITY 15.2A (L-154K2LN2)
Minto, Australia
BASE PLATE FOR FURNACE
- new
150 X 150mm (691600177)
Minto, Australia
FURNACE MUFFLE
- new
L 40/11 WITH FLAP DOOR B510 CONTROLLER WITH DATALOG CAPABILITY UP TO 1100C 40L CAPACITY REQUIRES 5 PIN 3 PHASE 10 AMP + NEUTRAL AND EARTH OUTLET (L-404K1LN1)
Minto, Australia
FURNACE MUFFLE
- new
LT 24/12 WITH LIFT DOOR AND ADJUSTABLE AIR INLET B510 CONTROLLER UP TO 1200C 24L CAPACITY 3 PHASE (LT24/12B510)
Minto, Australia
DOOR ONLY COMPLETE WITH INSULATION
- new
REPLACEMENT TO SUIT MUFFLE FURNACE LT 40/11 (601605224)
Minto, Australia
FURNACE MUFFLE
- new
LT 40/11 WITH LIFT DOOR B510 CONTROLLER WITH DATALOG CAPABILITY UP TO 1100C 40L CAPACITY REQUIRES AUSTRALIAN 5 PIN 3 PHASE 10 AMP + NEUTRAL AND EARTH OUTLET (L-404H1LN1)
Minto, Australia
Anton Paar HPA-S
- used
- Manufacturer: Anton Paar
Pressurised furnace system for digestion sample preparation temperature to 320C pressure to 130 bar, 240V
Artarmon, Australia
LNY AX-2G
- used
Porcelain vacuum furnace for dental applications programmable to 1305C maximum vacuum setting -97Kpa 'as new'
Artarmon, Australia

12

Overview

Muffle furnaces are high-temperature ovens used for applications requiring controlled heating, such as material testing, ceramics, and metal treatments. They feature an insulating muffle that prevents direct contact between the heating elements and the contents, ensuring uniform heat distribution and minimizing contamination.

FAQ

What should I consider when buying a used muffle furnace?

Check the maximum temperature, chamber size, and overall condition. Verify the functionality of the temperature controls and inspect for any signs of wear or damage.

How do I ensure the muffle furnace is shipped safely to my location?

Use a shipping service experienced in handling delicate and heavy equipment. Ensure the furnace is well-packed and cushioned to prevent damage during transit.

What is the maintenance schedule for a muffle furnace?

Regular maintenance includes checking and calibrating the temperature controls, cleaning the chamber to prevent contamination, and inspecting the heating elements for wear. Refer to the manufacturer’s manual for specific maintenance guidelines.