- Trusted Seller
0.63 ton Hammer Forging Hydraulic Lasco KH063
- Manufacturer: Lasco
Capacity : 0.63 ton, Ram weight: 630 kg, Max. height of both dies without dovetails : 360 mm, Upper die weight max. : 100 kg, Bear weight : 630 kg, Bear depth : 400 mm, Clear width between the guides : 420 ...
Europe - Trusted Seller
2500 tons Direct Drive Screw Press Lasco SPR2500
- Manufacturer: Lasco
Capacity : 2500 tons, Nominal press force : 25 MN, Permanently permissible press force : 40 MN, Impact blow force : 50 MN, Gross energy SPR SERIES : 500 kj, Ram stroke : 650 mm, Stroke per minutes : 20, St...
Europe 
LASCO SPP 315 - SCREW PRESS - 500 TON
- Manufacturer: Lasco
- Model: SPP 315
LASCO SPP 315 - SCREW PRESS - 500 TON PRESS LASCO PRESS 500 TON SCREW PRESS 500 TON
Austria- Trusted Seller
HYDRAULIC PRESS LASCO VPA 250
- Manufacturer: Lasco
- Stroke length: 500 mm
Specific type: HYDRAULIC PRESS | Max. force pressing: 250 tons. | Max. force return: 25 tons. | Hammer stroke: 500mm | Dimensions of table: (W X D) | Hammer dimensions: (L x W) | Dist. max between table and hamm...
São Paulo, Brazil - Trusted Seller
1999 LASCO FORGING-PRESS
- Manufacturer: Lasco
Capacity: 6 | Stroke: 500- 640 | Slide adjustment: NA | Bed area x-y: NA | Slide base area x - y: NA | Shut height: NA | Rolling boster: NA | Die cushion capacity: NA
New Delhi, India - Trusted Seller
2015 LASCO SCREW FORGING-PRESS
- Manufacturer: Lasco
Capacity: 2500 | Stroke: 600 | Slide adjustment: NA | Bed area x-y: 1720 x 1800 | Slide base area x - y: 2100 X 1320 | Shut height: NA | Rolling boster: NA | Die cushion capacity: NA
New Delhi, India - Trusted Seller
4 tons Hammer Forging Hydraulic Lasco
- Manufacturer: Lasco
Capacity : 4 tons, Item condition: Good working condition | Capacity tons: 4
India - Trusted Seller
630 tons Press Extrusion Hydraulic SSP630 Lasco
- Manufacturer: Lasco
Capacity : 630 tons. Daylight : 1400 mm, Job weight : 5 to 100 kgs, Job height : 1000 mm, Extrusion dia. : 250 mm, Producing Axles Shafts & Spindle Axle Beams. There is an additional motor so it can be used...
India 
160 TON LASCO VPA-160 PREFORM HYDRAULIC FORGING PRESS
- Manufacturer: Lasco
419-269-2000 870 Curtis Street Toledo, OH 43609 Machine Information 160 TON LASCO MODEL VPA-160 PREFORM HYDRAULIC FORGING PRESS: STOCK #16883 Stock #: 16883
Holland, OH
LASCO SPP 200
- Manufacturer: Lasco
- Stroke length: 320 mm
- Shut height: 550 mm
Permanently permissible maximum force: 320 t | Diameter of screw: 150 mm | Stroke: 320 mm | Stroke rate: 60 min^-1 | Shut height: 550 mm | Table size (left to right): 500 mm | Table size (front to back): 550 mm ...
Reinach, Switzerland
LASCO SPP 250 so
- Manufacturer: Lasco
- Stroke length: 300 mm
- Shut height: 550 mm
Permanently permissible maximum force: 400 t | Stroke: 300 mm | Shut height: 550 mm | Table size (left to right): 560 mm | Table size (front to back): 560 mm | Ram (left to right): 530 mm | Ram (front to back): ...
Reinach, Switzerland
LASCO SPP 315
- Manufacturer: Lasco
- Model: SPP 315
- Stroke length: 380 mm
- Shut height: 700 mm
Permanently permissible maximum force: 500 t | Diameter of screw: 190 mm | Stroke: 380 mm | Stroke rate: 45 min^-1 | Shut height: 700 mm | Table size (left to right): 630 mm | Table size (front to back): 630 mm ...
Reinach, Switzerland
LASCO SPP 250
- Manufacturer: Lasco
- Stroke length: 350 mm
- Shut height: 600 mm
Permanently permissible maximum force: 400 t | Diameter of screw: 170 mm | Stroke: 350 mm | Stroke rate: 45 min^-1 | Shut height: 600 mm | Table size (left to right): 600 mm | Table size (front to back): 600 mm ...
Reinach, Switzerland
1983 LASCO SKP 2500
- Manufacturer: Lasco
- Model: SKP 2500
- Stroke length: 600 mm
- Daylight: 2,600 mm
Nominal force: 2500 t | Allowed max. force: 4000 t | Blow die to die: 5000 t | Stroke: - 600 mm | Distance between columns: 1720 mm | Daylight (max.stroke up, adjustment up): 2600 mm | Surface of table: 1720 x 1...
Eislingen, Germany
Reinach, Switzerland
Tip: Enter manufacturer, model or keyword