Test, Lab, Medical equipment » Lasers & Light Sources » Bavaria

Building Filters

24

Used frequency controller in Bavaria, Germany

TOPTICA DLC pro: Digital Control
- Manufacturer: Toptica
Operator controls: Touch Display, 10 push buttons, 4 knobs, 1 key switch | Display: 7 inch, 800 x 480 pixels, 262 k colors | Touch panel: Projective capacitive (PCT) with multi-touch capability | Interfaces: Eth...
Munich, Germany
TOPTICA DLC pro: Digital Control
- Manufacturer: Toptica
Operator controls: Touch Display, 10 push buttons, 4 knobs, 1 key switch | Display: 7 inch, 800 x 480 pixels, 262 k colors | Touch panel: Projective capacitive (PCT) with multi-touch capability | Interfaces: Eth...
Munich, Germany
TOPTICA TA-SHG pro
- Manufacturer: Toptica
Resonant frequency doubling stage Wavelengths: 330 .. 780 nm, linewidth 1 .. 120 kHz AutoAlign and FiberMon options PowerLock output power stabilization With digital control DLC pro: Less drift & linewidth The TA...
Munich, Germany
TOPTICA TA-FHG pro
- Manufacturer: Toptica
Two resonant frequency doubling stages SUV and AutoAlign options - unprecedented DUV power & lifetime PowerLock output power stabilization With digital control DLC pro: Less drift & linewidth The TA-FHG pro is a ...
Munich, Germany
TOPTICA DFB pro
- Manufacturer: Toptica
Single-frequency laser with distributed-feedback diode Available wavelengths: 633 nm, 760 nm .. 3500 nm Mode-hop free tuning range: Up to 1400 GHz Reliable operation even in harsh environments 3 laser heads – wid...
Munich, Germany
TOPTICA TopMode
- Manufacturer: Toptica
TopSeller: 100 mW at 405 nm Customized wavelengths 375 - 515 nm Enables repeatable, high-resolution measurements Easy OEM integration Easy OEM IntegrationTOPTICA’s TopMode lasers operate as easily as a HeNe, bu...
Munich, Germany
TOPTICA iBeam smart WS
- Manufacturer: Toptica
405 nm, 468 nm, 488 nm, 633 nm, 638 nm , 660 nm, 685 nm, 785 nm , 808 nm, 828 nm , 852 nm Narrow linewidth (typ. 15 MHz) High wavelength stability Perfect choice for applications like Raman, Diffuse Correlation S...
Munich, Germany
TOPTICA PFD pro
- Manufacturer: Toptica
Broad range of offset frequencies 5 MHz .. 10 GHz Support of frequency scans and jumps User friendly remote control Designed to cooperate with FALC pro TOPTICA’s brand new PFD pro is a broadband phase and frequen...
Munich, Germany
TOPTICA TeraBeam
- Manufacturer: Toptica
Two DFB pro lasers + digital frequency control Available wavelengths: 780 nm and 1.5 µm Difference frequency tuning up to 2 THz Frequency accuracy < 2 GHz, minimum step size < 10 MHz Computerized frequency tuning...
Munich, Germany
TOPTICA DLC pro Lock
- Manufacturer: Toptica
Software license to enable additional features of DLC pro Two feedback channels with independent PID regulators Top-of-fringe lock with included modulation and demodulation or side-of-fringe lock Automatic optimi...
Munich, Germany
TOPTICA FALC 110 & mFALC 110
- Manufacturer: Toptica
For linewidth reduction and phase locking (mFALC) PID regulator with less than 15 ns signal delay 90° phase delay at 45 MHz Addresses laser current (fast) and slow element (drift) Sub-Hz laser linewidths demonstr...
Munich, Germany
TOPTICA MSHG pro
- Manufacturer: Toptica
Highly-stable resonant frequency-doubling stage Spectral coverage 330 .. 780 nm with power up to 2 W from PM fiber Includes AutoAlign for coupling into amplifier chip, doubling stage and output fiber Low noise an...
Munich, Germany
TOPTICA FemtoFErb 1950
- Manufacturer: Toptica
Frequency shifted Er-doped fiber laser Short pulse emission < 100 fs @ 1950 nm Alignment-free all-fiber setup, use of PM fibers only SAM mode-locking technology Compact design: optics and electronics just in one ...
Munich, Germany
TOPTICA DL-SHG pro
- Manufacturer: Toptica
Resonant frequency doubling stage Wavelengths: 210 .. 680 nm, linewidth 1 .. 120 kHz AutoAlign, PowerLock and FiberMon options With digital control DLC pro: Less drift & linewidth The grating stabilized diode las...
Munich, Germany
TOPTICA Mid Infrared Tunable Laser
- Manufacturer: Toptica
1.43 - 4.2 µm (2400 - 7000 cm-1) Narrow linewidth: 2 MHz (1·10-4 cm-1) Hands-free motorized tuning 300 GHz (10 cm-1) mode-hop-free tuning range Easy all-digital DLC pro control Mid-infrared tunable lasers between...
Munich, Germany

12

Overview

Lasers and light sources are essential tools in various industries, including manufacturing, medical, and scientific research. These devices emit focused light beams used for cutting, engraving, medical procedures, and experiments. Depending on the application, lasers can vary in power, wavelength, and design.

FAQ

What should I consider when buying a used laser or light source?

Check the device's power rating, wavelength, and overall condition. Ensure it meets the requirements for your specific application and verify any available maintenance records.

How do I ensure the laser or light source is shipped safely?

Use a transport service experienced in handling delicate equipment. Ensure the device is properly packaged, with adequate cushioning and protection against shocks.

What is the maintenance schedule for lasers and light sources?

Regular maintenance includes cleaning optical components, ensuring proper cooling, and checking electrical connections. Refer to the manufacturer’s manual for specific maintenance guidelines.