• 2008 Romi C420 CNC Flatbed Tool Room Lathe, 17x40", Siemens 802D #3508

    $29,500 - Connecticut, United States
    • Manufacturer: Romi

    asset description notes: romi c420 cnc flatbed tool room lathe, siemens 802d control swing over bed: 17"(430mm) swing over cross slide: 8"(200mm) z-axis travel: 40"(1016mm) x-axis travel: 8.7"(220m...

  • Bullard Cutmaster 36" vertical turret lathe, High Column, 3-Jaw Chuck, Max Swing 45", Side Head #3514

    $20,500 - Connecticut, United States
    • Manufacturer: Bullard

    asset description notes: bullard cutmaster 36" vertical turret lathe, high column 3-jaw chuck swiveling turret head 30 deg. swing with side head 39" max swing 45", side head below table side head s...

  • Okuma Tatung HTC-6 CNC Lathe, 10HP, Fanuc 21i-T #3426

    $22,500 - Connecticut, United States
    • Manufacturer: Okuma

    asset description notes: okuma tatung htc-6 cnc lathe swing over way covers-17.72(in) max. cutting dia. 8.27(in) max. cutting length 11.02(in) bar capacity 1.62(in) spindle nose- jls 140 flat nose ...

  • 2000 Index G200C twin turret CNC Lathe #3398

    $62,500 - Connecticut, United States
    • Manufacturer: Index

    asset description notes: index g200c cnc lathe, twin turret control siemens c200-4 c axis main spindle twin turrets: 14 station turrets max turning length 15.7" max turning diameter 16.5" spindle 5...

  • Hardinge HC Secondary Operation Turret Lathe #3273

    $5,450 - Connecticut, United States
    • Manufacturer: Hardinge

    asset description notes: hardinge hc secondary operation turret lathe spindle spindle with round 5c hardinge collets: 1-1/16" with hexagon 5c hardinge collets: 7/8" with square 5c hardinge collets:...

  • KINGSTON Model HR4000, 30" x 160" Lathe (1977 Model)

    $37,500 - Watertown, CT, USA
    • Manufacturer: Kingston

    kingston model hr4000, 30" x 160" lathe (1977 model) including opitional 19.7" steady rest with roller jaws  (min capacity 11.1") 20” face plate 16" dia. sca 3-jaw chuck, 20 hp 4-1/16" spindle bo...

  • Cadillac 84" Bed Lathe W/Removable Gap Rohm 12" 3-Jaw Chuck, 4 Way Tool Post & Tailstock NiceCadillac 84" Bed Lathe W/Removable Gap Rohm 12" 3-Jaw Chuck, 4 Way Tool Post & Tailstock Nice

    $9,900 - Watertown, CT, USA
    • Manufacturer: Cadillac

    make: cadillac 84" bed (overall) 12" swing removable gap threading capabilities two speed spindle low rpm speeds: 32,62,82,112,160,200 high rpm speeds: 285,395,510,710,1010,1800 12" rohm 3-jaw chuc...

  • Hitachi Seiki Hitec-Turn 20SII

    $16,500 - Watertown, CT, USA
    • Manufacturer: Hitachi

    make: hitachi seiki model: hitec-turn 20sii serial: available for serious inquires only 8" 3-jaw chuck (hydraulic) swing: 15" max turning diameter: 8" bar capacity: 2" spindle bore: 2.3" max x-axis...

  • Hitachi Seiki HT20

    $11,500 - Watertown, CT, USA
    • Manufacturer: Hitachi

    make: hitachi seiki model: ht20 serial: available for serious inquiries only controls: fanuc 10te-f max swing: 17" max machining length: 12" max x-axis travel: 5" max z-axis travel: 12.4" spindle n...

  • OmniTurn GT-75

    $18,900 - Watertown, CT, USA
    • Manufacturer: OmniTurn

    make: omniturn model: gt-75 control: omniturn pc based max x-axis travel: 12" max z-axis travel: 9" rapid travel: 300 ipm feed rate: .00005 ipr to 300 ipm threading: 240 tpi to unlimited (useful fo...