Used processing machines

DCR-BHS - BOOT HEAT SEALING MACHINE

One of the key machines in the Goodyear shoe manufacture process. The heating element quickly heats the guide iron up as soon as the machine is turned on. Then the rubber sole and the welted upper are presented t...

DCR-SSL STAPLE SIDE LASTING MACHINE

One of the key machines in the Goodyear shoe manufacture process. The staple side laster creates staple from a wire reel, and then bends and hammers them into the shoe. The staples are forced through the insole r...

DCR-IT - INSEAM TRIMMER

One of the key machines in the Goodyear shoe manufacture process. Used for trimming the excess material from the lasted upper and insole rib after the welt sewing process. Our versatile motors give you full contr...

DCR-OS - OUTSOLE STITCHER

• Manufacturer: DCR

One of the key machines in the Goodyear shoe manufacture process. The outsole stitcher stitches the sole onto welted shoes using a lockstitch. The shoe is offered up to the machine with the sole facing up ready f...

DCR-GIS - GOODYEAR INSEAM STITCHER

• Manufacturer: DCR

One of the key machines in the Goodyear shoe manufacture process. The GIS stitches the welt onto the lasted upper and insole rib using a chainstitch. The shoe is offered up to the machine with the sole facing up ...

DCR-54A- GOODYEAR WELT STITCHER

• Manufacturer: DCR

One of the key machines in the Goodyear shoe manufacture process. The 54A also known as a Norwegian inverted seam stitcher stitches the welt onto the lasted upper and insole rib using a chainstitch. The shoe is o...

DCR-GIS - GOODYEAR INSEAM STITCHER (BALLET SHOES)

• Manufacturer: DCR

GIS specialised for ballet pointe shoes. The GIS stitches the upper through the channeled lip of the insole. The shoe is offered up to the machine with the sole facing up. The operator can then use the treadle at...

PROCRT-3016F

• Manufacturer: DCR Machines

The ProCRT Series is specialised for cutting, routing & milling composites. If you need multiple toolheads for multiple materials then the CRT is the right machine as it can also be used for punching, creasing an...

PROCRT-2516F

• Manufacturer: DCR Machines

The ProCRT Series is specialised for cutting, routing & milling composites. If you need multiple toolheads for multiple materials then the CRT is the right machine as it can also be used for punching, creasing an...

PROCRT-3625F

• Manufacturer: DCR Machines

The ProCRT Series is specialised for cutting, routing & milling composites. If you need multiple toolheads for multiple materials then the CRT is the right machine as it can also be used for punching, creasing an...

PROCRT-4016F

• Manufacturer: DCR Machines

The ProCRT Series is specialised for cutting, routing & milling composites. If you need multiple toolheads for multiple materials then the CRT is the right machine as it can also be used for punching, creasing an...

PROCRT-9009F

• Manufacturer: DCR Machines

The ProCRT Series is specialised for cutting, routing & milling composites. If you need multiple toolheads for multiple materials then the CRT is the right machine as it can also be used for punching, creasing an...

PROCRT-1813F

• Manufacturer: DCR Machines

The ProCRT Series is specialised for cutting, routing & milling composites. If you need multiple toolheads for multiple materials then the CRT is the right machine as it can also be used for punching, creasing an...

PROCRT-6016C

• Manufacturer: DCR Machines

The ProCRT Series is specialised for cutting, routing & milling composites. If you need multiple toolheads for multiple materials then the CRT is the right machine as it can also be used for punching, creasing an...