Used uk

DCR-BHS - BOOT HEAT SEALING MACHINE

One of the key machines in the Goodyear shoe manufacture process. The heating element quickly heats the guide iron up as soon as the machine is turned on. Then the rubber sole and the welted upper are presented t...

DCR-IT - INSEAM TRIMMER

One of the key machines in the Goodyear shoe manufacture process. Used for trimming the excess material from the lasted upper and insole rib after the welt sewing process. Our versatile motors give you full contr...

DCR-GIS - GOODYEAR INSEAM STITCHER (BALLET SHOES)

• Manufacturer: DCR

GIS specialised for ballet pointe shoes. The GIS stitches the upper through the channeled lip of the insole. The shoe is offered up to the machine with the sole facing up. The operator can then use the treadle at...

DCR-OS - OUTSOLE STITCHER

• Manufacturer: DCR

One of the key machines in the Goodyear shoe manufacture process. The outsole stitcher stitches the sole onto welted shoes using a lockstitch. The shoe is offered up to the machine with the sole facing up ready f...

DCR-GIS - GOODYEAR INSEAM STITCHER

• Manufacturer: DCR

One of the key machines in the Goodyear shoe manufacture process. The GIS stitches the welt onto the lasted upper and insole rib using a chainstitch. The shoe is offered up to the machine with the sole facing up ...

DCR-SSL STAPLE SIDE LASTING MACHINE

One of the key machines in the Goodyear shoe manufacture process. The staple side laster creates staple from a wire reel, and then bends and hammers them into the shoe. The staples are forced through the insole r...

DCR-54A- GOODYEAR WELT STITCHER

• Manufacturer: DCR

One of the key machines in the Goodyear shoe manufacture process. The 54A also known as a Norwegian inverted seam stitcher stitches the welt onto the lasted upper and insole rib using a chainstitch. The shoe is o...

DCR-SERIES 70 BEAM PRESS

• Manufacturer: DCR Machines

70 ton Hydraulic Beam Press 3 Phase - 380v Available in 2 sizes, Beam with 1600mm/2200mm x 560mm Effective cutting width between the pillars 1050mm or 1600mm With front manual push pull table giving a potential c...

DCR-BP70 BEAM PRESS

• Manufacturer: DCR Machines

70 ton Hydraulic Beam Press 3 Phase - 380v Available in 2 sizes, Beam with 1600mm/2200mm x 560mm Effective cutting width between the pillars 1050mm or 1600mm With front manual push pull table giving a potential c...

DCR-BFP100 BELT FED PRESS 100T

100 ton belt fed automatic beam press with 2000 x 1500 beam and cutting area with a 3m feed in and a 2m feed out system. Can be used for cutting larger or high production automotive, aerospace and marine interior...

DCR-RBP60 RECEDING BEAM PRESS

DCR-RBP60 This 60 ton receding beam press has a beam which moves from the back of the machine to the front cutting area then returns back after cutting. 2000 x 800 cutting area Ideal for large area cutting tools ...

DCR-BP60 REFURBISHED CUTTING PLASTIC

• Manufacturer: DCR Machines

SAMCO 60 ton Hydraulic Beam Press 3 Phase - 380v Available in 2 sizes, Beam width 1600mm or 2200mm x 560mm deep Effective cutting width between the pillars 1050mm or 1600mm With front manual push pull table givin...

ATOM-KS400 SPLITTER

• Manufacturer: Atom

Rebuilt 400mm splitter with top and bottom driving rollers for splitting automotive head rest covers – with variable speed control and special (split – stop – reverse) facility for half splitting straps, panels, ...

DCR-EA420 SPLITTER

• Manufacturer: DCR Machines

Rebuilt 420mm splitter with top and bottom driving rollers for splitting automotive head rest covers – with variable speed control and special (split – stop – reverse) facility for half splitting straps, panels, ...

ATOM-KS400

• Manufacturer: Atom

Rebuilt 400mm splitter with top and bottom driving rollers for splitting automotive head rest covers – with variable speed control and special (split – stop – reverse) facility for half splitting straps, panels, ...