Category

Country

Used Leblond Machine Tools

- 170 listings found
Sort by Price: Low to High | High to Low
  • 1984 Leblond

    • Manufacturer: Leblond
    • Spindle Bore: 9"
    • Distance between Centers: 72"

    (2) 22" cushman 4 jaw chucks 1998 electrical fanuc upgrades, a/c spindle drive, servo drives reground ways in 2002 automatic lube system chip conveyor

    No price
    Smyrna, TN, USA
  • Leblond 5029

    • Manufacturer: Leblond
    • Distance between Centers: 100"

    swing: 50 | machining dia.: 30 | spindle speed mimumun: 750 rpm | distance between centers: 100"

    No price
    Smyrna, TN, USA
  • 1970 Leblond 4025 25093

    • Manufacturer: Leblond
    • Model: 4025
    • Spindle Bore: 3"
    • Distance between Centers: 168"

    Taper attachment threading 32" 4-jaw chuck accurite digital readout threading taper attachment roller type steady rest 75 hp spindle motor inspect under power, philadelphia pa

    No price
    Melville, NY, USA
  • Leblond Tapeturn 6640 26733

    • Manufacturer: Leblond
    • Distance between Centers: 216"

    50 ton weight capcity 60" wide bed ge mark century 1050 cnc control 58" diameter 4-jaw face plate type chuck hardened & ground steel ways automatic lubrication precision ball screws offset tailstock with anti-fri...

    No price
    Melville, NY, USA
  • 2000 LeBlond 50/30 Raised 4625 NK Tape Turn I – Flat Bed 2NK506

    • Manufacturer: Leblond
    • Spindle Bore: 3.06 in, 77.777 mm
    • Distance between Centers: 180.00 in, 4572.00 mm

    Press-in center-in chuck, feedrate range .1 to 150 inches per minute, tailstock quill travel 18 in (457.2 mm), carriage length on ways 46.75 in (1187mm), bed width 34 in (863.6mm), quick change slide tool holder,...

    No price
    Washington, PA, USA
  • 1977 LeBlond Regal 10E #16596

    • Manufacturer: Leblond

      Specifications 19" swing over bed 78" between centers inch & metric threading servo shift head stock 1-3/4" hole through spindle head stock 12 speed gearbox and belt driven head stock 1600 max. rpm spindle tapere...

      No price
      Jackson, MI, USA
    • 40" x 252" LEBLOND 4025NK 1975,12.5" BORE,(2) 4-JAW CHUCKS 61145

      • Manufacturer: Leblond
      • Distance between Centers: 252"
      • Spindle Nose: 17-3/4"

      40" x 252" leblond model: 4025nk hollow spindle engine lathe new: 1975 specifications: swing over bed ways ................. 40" swing over cross slide .............. 25" spindle nose ........................ 17-...

      No price
      Huntington, NY, USA
    • LeBlond Cutter Grinder

      • Manufacturer: Leblond

        Leblond 9" x 24" cutter grinder floor space for operating: 61″ x 61″ table longitudinal movement: - hand feed: 24″ - power feed: 16″ table vertical movement: 9"

        No price
        Salt Lake City, UT, USA
      • LeBlond Regal 15 x 48 Size Engine Lathe

        • Manufacturer: Leblond
        • Distance between Centers: 48" (as measured)

        Threads & feeds thru hole: 1-1/2" o/a bed length: 71" tooling: ...8" 3-jaw & 12" 4-jaw chucks ...drill chuck ...steady rest ...collet holder ...splash guard & hoist (see pics) electrics: 230 volt, 3 phas...

        $6,000 (USD)
        Portland, OR, USA
      • Leblond Regal Sliding Bed Gap Lathe (25" Swing - 52" gap)

        • Manufacturer: Leblond
        • Model: REGAL

          Leblond regal “servo shift” sliding bed gap lathe (25"/52" x 180") specifications: swing over bed 25" swing in gap 52" (60" max length in gap) swing over cross slide 18.25" spindle bore 3.06” center distance (bed...

          $22,500 (USD)
          Hubbard, TX, USA