Used test instrumente in Dublin, Ireland

Schaffner NSG 200C

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG-200C is a modular disturbance simulator mainframe designed with a rugged 19-inch tabletop housing. It centralizes critical functions including power input, UUT connections, overload prot...

Rohde & Schwarz ESPI7

• Manufacturer: Rohde & Schwarz
• Model: ESPI7

Details The Rohde & Schwarz ESPi 7 EMC Spectrum Analyzer covers a frequency range from 9 kHz to 7 GHz, offering high sensitivity with a noise floor of -155 dBm (1 Hz) and resolution bandwidth from 10 Hz to 10 MHz...

Rohde & Schwarz ESIB40

• Manufacturer: Rohde & Schwarz
• Model: ESIB40

Details The Rohde & Schwarz ESIB-40 EMI Test Receiver operates from 20Hz to 40GHz, designed for precise interference measurements compliant with CISPR 16-1 and VDE 0876. It includes all required detectors, a 20dB...

Rohde & Schwarz ESIB26

• Manufacturer: Rohde & Schwarz
• Model: ESIB26

Details The Rohde & Schwarz ESIB26 offers high sensitivity and low inherent noise, enabling precise signal detection across a wide dynamic range. Featuring fast measurement speeds, integrated preselection and pre...

Noiseken INS-4040

• Manufacturer: NoiseKen

Details The Noiseken INS-4040 4KV Impulse Noise Simulator is designed to generate precise impulse noise signals up to 4kV, ideal for EMC testing and electronic component evaluation. It offers adjustable pulse wid...

Schaffner NSG 500B/506C

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG-500B-506C is a high-performance EMC simulator system engineered to replicate electrical fast transients and burst disturbances per IEC/EN immunity testing standards. Featuring modular ge...

Schloder SESD230

Details The Schloder SESD230 ESD Simulator delivers up to 30kV in both air and contact discharge modes, complying with IEC 61000-4-2 standards (150 pF / 330 Ohm network). It supports single or repeated pulse mode...

Rohde & Schwarz ESW8

• Manufacturer: Rohde & Schwarz
• Model: ESW8

Details The Rohde and Schwarz ESW8 is an advanced EMI test receiver supporting frequencies from 2 Hz to 8 GHz, delivering exceptional RF characteristics and fast measurement speed. It complies with CISPR16-1-1, A...

Teseq (Schaffner) NSG437

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG437 ESD simulator delivers precise air and contact discharge testing up to 30 kV, ensuring compliance with IEC/EN 61000-4-2, ISO 10605, and other standards. Featuring a touch panel ...

Haefely MAG100

• Manufacturer: Haefely

Details HAEFELY MAG100 The Haefely MAG 100 has a 1m x 1m square, single turn antenna. A cur of 120A is needed to feed the coil to produce a field of 100A/m. The MAG100 includes a cur transformer capable of delive...

Schaffner NSG3025

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG3025 Burst Generator offers a pulse amplitude range from 200V to 4.8kV ±10% (open circuit), with burst frequency adjustable between 0.1kHz and 1MHz ±2%. It supports 1 to 255 spikes per pa...

Schaffner NSG222A

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG222A Pulse Interference Simulator delivers precision testing with 5ns/100ns pulse forms, featuring a built-in coupling network for symmetrical and asymmetrical pulse injection on mains co...

Rohde & Schwarz ESPI3

• Manufacturer: Rohde & Schwarz
• Model: ESPI

Details The Rohde & Schwarz ESPI3 is a 9kHz to 3GHz precompliance test receiver designed for EMI diagnostics across CISPR, EN, ETS, FCC, ANSI C63.4, VCCI, and VDE standards. It features five selectable detectors ...

Schaffner NSG 224A

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG-224A is a modular disturbance simulator mainframe engineered for the NSG-200 series, delivering core functionality such as power handling, line filtering, overload protection, and phase ...

Emco 3810/2 SH

• Manufacturer: Emco

Details The EMCO 3810/2 SH Single Phase LISN (Shuko Connector) operates over a frequency range of 9 kHz to 30 MHz, supporting a continuous current rating of 10 A. It features two lines (L+N) plus a ground-switche...