Used Balers in Germany

New Holland Roll-Bar 125
- Manufacturer: New Holland
Description:New Holland baler Roll-Bar 125 fixed chamber baler (successor of BR 6090) new design, stronger chain drive, smoother running, central lubrication, wide tires, 15 cutting knives, own weight only 2800 k...
Freiburg im Breisgau, Germany
2011 Krone Comprima CF 155 XC
- Manufacturer: Krone
- Model: Comprima CF 155
- Hours: 21,000 h
- Bale width: 1.2 m
Used baler-wrapper combination approx. 21,000/16,500 bales Net wrapping device with top drawbar eye 40/50 Cutter with 17 knives Pickup 2,150 mm wide Automatic chain tensioning T-axle with air brake Delta control ...
Neuhof, Germany
1998 CLAAS Variant 280 Roto Cut
- Manufacturer: Claas
- Model: VARIANT 280
- Operating weight: 2,300 kg
- Bale width: 1.2 m
Cutting unit: Yes | Ballenanzahl: 35000
$14,111 USD
Get financing
Est. $277/mo
Bad Lauterberg, Germany
1998 CLAAS Variant 280 Roto Cut
- Manufacturer: Claas
- Model: VARIANT 280
- Operating weight: 2,300 kg
- Bale width: 1.2 m
Cutting unit The machine has pressed approx. 1,500 bales per year. The belts were completely replaced last season. Some of the sprockets, chains and hydraulic hoses have been replaced.
$14,111 USD
Get financing
Est. $277/mo
Bad Lauterberg, Germany
2008 Krone Comprima F 155 XC
- Manufacturer: Krone
- Model: Comprima F 155 XC
- Hours: 19,000 h
- Bale width: 1.2 m
ca. 19,000 bales With drawbar eye 40 at the top Cutting unit PU 17 blades Net binding Single-axle With central lubrication With bale ramp Cardan shaft On-board computer / monitor, Pickup, Roller hold-down, Suppor...
Neuhof, Germany
2019 Krone Comprima V 150 XC XTREME
- Manufacturer: Krone
- Model: Comprima
- Hours: 11,000 h
- Bale width: 1.2 m
Approx. 11,000 bales X-Treme version Net wrapper PTO shaft, 80° cam follower with 40° top drawbar eye Hydraulic ground lowering PU 2150 cutting unit 17 blades Automatic chain lubrication E-axle with air brake wit...
Neuhof, Germany
2025 New Holland Pro Belt 190 RC
- Manufacturer: New Holland
- Hours: 150 h
- Bale width: 2.3 m
Demonstration machine 2025 FI humidity sensor (accessory pack) Central lubrication system - The system is started when the PTO speed is above 200 rpm The 16 main lubrication points are lubricated automatically Be...
Neuhof, Germany
2016 Krone Fortima V 1500 MC
- Manufacturer: Krone
- Model: FORTIMA V 1500 MC
- Hours: 12,803 h
- Bale width: 2.05 m
Variable bale chamber 1.00 - 1.50 mtr. Pick up with rotor 2,05mtr. and roller crop press Cutterbar with 17 knives Bale ejector Pick Up support wheel IsoBus PickUp, Roller hold-down device, Support foot / wheel, s...
Neuhof, Germany
2024 Krone VariPack V 165 XC
- Manufacturer: Krone
- Model: VARIPACK V 165 XC
- Hours: 2,200 h
- Bale width: 2.15 m
approx. 2200 bales With drawbar eye 40 at the top Cutting unit PU 17 knives PTO shaft Nockenk.80Grd Net wrapper E-axle with pressure brake Tires 500/55-20 6-hole Comfort 1.0 PickUp, Roller hold-down device, suppo...
Neuhof, Germany
Case RBX453
- Manufacturer: Case IH
- Model: RBX
- Bale width: 1.2 m
- Bale diameter: 1.25 m
Description:Cutting unit 15 knives individually mounted and secured, knife base can be lowered hydraulically - 65mm cutting length Lowerable floor Hydraulic braking by means of a belt release system Bale ejector ...
$14,823 USD
Get financing
Est. $291/mo
Freiburg im Breisgau, Germany
2018 Krone Comprima F 125 XC
- Manufacturer: Krone
- Model: Comprima
- Hours: 18,672 h
- Bale width: 1.2 m
Approx. 18,700 bales Net wrapping Hydraulic ground lowering PU 2150 cutting unit with 17 blades with central lubrication Electric axle with air brake with bale kicker Beta II InCab terminal On-board computer/moni...
Neuhof, Germany
2009 New Holland BR 7070
- Manufacturer: New Holland
- Model: BR7070
- Hours: 13,587 h
- Bale width: 1.2 m
approx. 13500 bales Net binding Cutting device Crop-Cutter cutting rotor Single axle with air brake Pick-up with roller hold-down device On-board computer / monitor, Performance monitor, PickUp, roller hold-down ...
Neuhof, Germany
2019 Krone Comprima V 180 XC
- Manufacturer: Krone
- Model: Comprima
- Hours: 9,000 h
- Bale width: 1.2 m
approx. 9000 bales KRONE tractor retrofit accessory pack Net wrapper PTO shaft cam shaft 80Grd with drawbar eye 40 above hydr. floor lowering Cutting unit PU 2150 17 knives with central lubrication T-axle with ai...
Neuhof, Germany
Deutz-Fahr HD 36.0
- Manufacturer: Deutz-Fahr
- Model: HD 360
Used high-pressure press PTO shaft Pickup truck Single-axle trailer Bottom hitch (eyelet)
Neuhof, Germany
2012 Lely RP 245
- Manufacturer: Lely
- Model: RP 245
34926 Bale, net wrapping, roller crop press, top hitch, support wheels for pickup, Rotocut, number of knotters: 1 Working width: 220 cm Combined baler and wrapper
$16,465 USD
Get financing
Est. $323/mo
Penzlin, Germany
Claas VARIANT 485 Baler
- Manufacturer: Claas
- Model: VARIANT 485
Good condition Claas VARIANT 485 Balers available between 2016 and 2017 years. Located in Germany and other countries. Click request price for more information.
Germany