- Trusted SellerAuction
Fully automatic sheet metal processing system Salvagnini P4-1812
- Manufacturer: Salvagnini
- Model: P4
SN: 2000522, machine no. 915168, power 35 kW, material infeed/buffer, die bending unit, C-frame press, type P4-1812, SN TC27155C, material outfeed, conveyor line, type ADP2715, separate control panel, grid enclos...
Elsterheide, GermanyVisit Auction Website - Trusted Seller
2010 ATS US-CL 360x360/20
- Manufacturer: ATS
max. size 36 x 36 cm age 2010 banding device computer control with monitor US 2000 Servopusher CL banding unit for paper and film band max. pile height 30 cm mobile sub-frame Delivery time: immediately
Weil der Stadt, Germany 2017 Schröder AKV swivel bending machine
- Manufacturer: Schroeder
Used Schröder swing bending machine with pneumatic bending jaw support (Compressed air required) with manual Knoll roller shear, with Knoll profiling and closing head The machine will be professionally repaired...
Hohenbrunn, Germany1987 Biegemaster BMTH long bending machine
- Manufacturer: Biegemaster
The used 8-meter Biegemaster long-reach bending machine offers a robust solution for the precise bending of sheet metal over long lengths. The new control system with memory and adjustable bending parameters ensu...
Hohenbrunn, Germany- Trusted Seller
Krause FNP
- Manufacturer: Krause
Antique Joint nipping machine Krause FNP Antique bending downward press - Antique Joint nipping machine Krause FNP Year built / Year ca. 1950 - Serial-No. 71635 Press area / Press area max. 250 x 500mm
Emskirchen, Germany 1981 Swivel bending machine RAS 64.25
- Manufacturer: RAS
Used RAS motor-driven bending machine, with foot switch, simple control up to 6 bending angles, adjustable potentiometer, manual bending jaw lowering. The machine will be professionally repaired, inspected, and...
Hohenbrunn, Germany2023 Swing-Bending Machine SCHECHTL LBX310
- Manufacturer: Schechtl
used Schechtl manual shearing/bending machine, with manual stop 500mm, Year of manufacture: 2023/New/Showroom model with signs of use Machine is repaired, tested, cleaned by a specialist and then fully functional...
Hohenbrunn, Germany2021 Schechtl MAF 400 swivel bending machine
- Manufacturer: Schechtl
Used Schechtl swing bending machine with the following equipment: - 1 sharp guide bar 20°, offset, 1 mm radius for the upper beam - 1 insert rail each 10/100 mm and 24/100 mm for the bending beam - 2 foot switc...
Hohenbrunn, Germany- Trusted Seller
Banding machine, pallet labeling
- Manufacturer: AETNA Group
Additional title: Roboband / Logomatic | Capacity: 150 paletts / h | Power: 5,5 kW | Current: 10 A | Voltage: 400 Volt | Frequency: 50 Hz | Weight: 1700 kg
Freising, Germany 2002 Long bending machine Thalmann Pico 150-6.2
- Manufacturer: Thalmann
- Power requirement: 3 kW
Used Thalmann press brake, motorized shear, 5 stop fingers, laser safety device. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be perfor...
Hohenbrunn, Germany1991 Jorns SuperLine-300-SO-CNC-6 long bending machine
- Manufacturer: Jorns
This long-folding machine SuperLine-300-SO-CNC-6 from Jorns AG is a well-preserved, robust hydraulic swivel bending machine for precise and repeatable bending work in sheet metal processing. It is especially suit...
Hohenbrunn, Germany2000 long bending machine Jorns ML200-SO-CNC400A-4
- Manufacturer: Jorns
Used Jorns hydraulic swing bending machine, with material thickness adjustment, hydraulics on the left side of the machine, without roller shear, bending beam with removable extension rail approx. 8mm, 3 stop fi...
Hohenbrunn, Germany1992 Ozamech KM 3000-2.5 swivel bending machine
- Manufacturer: Ozamech
Used Ozamech folding machine, easy program angle setting on the side stand, with foot switch, removable extension rail, upper jaw rail approx. 30 degrees Machine is unrepaired, in its current condition
Hohenbrunn, Germany- Trusted Seller
Emskirchen, Germany 2003 Long bending machine Jorns NL125-SM-OP 2100/2-4
- Manufacturer: Jorns
Used hydraulic Jorns press brake, with foot switch, emergency stop rail, retractable sheet metal supports, hydraulic roller shear up to 1.50 mm, control with 9 bending angles. The machine has been professionally...
Hohenbrunn, Germany
Akyapak AS 95-20/1.5 Bending & Forming
- Manufacturer: Akyapak
- Model: AS 95-20/1.5
Good condition Akyapak AS 95-20/1.5 Bending & Formings manufactured in 2025. Located in Germany and other countries. Click request price for more information.
Germany
Tip: Enter manufacturer, model or keyword
