Used Granulators & Pelletizers in Germany

Rapid 45/35 KB #12258

• Manufacturer: Rapid

3-knife rotor 2 rows of stator knives Cross section approx. 350 x 450 mm

Condux CS 300/600 II LA #11649

• Manufacturer: Condux

Power: 15 kW | Use: Plastic | Rotor knives: 4 | Stator knives: 2 | Rotor width: 600 mm | Rotor diameter: 280 mm | Cross section: approx. 400 x 600 mm

ZERMA GSC

• Manufacturer: Zerma

Compact soundproofed granulator ZERMA GSC Our compact cutting mills of the GSC series, with their open and agressive rotors, were specifically designed for the injection- and blow molding industry. Typical applic...

ZERMA GSE

• Manufacturer: Zerma

Compact granulator ZERMA GSE Our compact cutting mills of the GSE series, with their open and agressive rotors, were specifically designed for the injection- and blow molding industry. Typical applications for th...

ZERMA GSL 180

• Manufacturer: Zerma

Slow speed granulator ZERMA GSL 180 The low-speed granulators in the GSL series have been specially developed for injection molding applications. In most cases, the regrind obtained is fed directly back into the ...

Herbold SML 30/50 C #12659

• Manufacturer: Herbold

Soundproved 3-knife rotor 2 rows of stator knives Cross section approx. 500 x 490 mm

INAN 50/80 #11924

• Manufacturer: INAN

4 Rows of rotor knives 2 Rows of stator knives Cross section ca. 800 x 450 mm

ZERMA GSP for tubes/pipes

• Manufacturer: Zerma

Granulator ZERMA GSP for tubes/pipes Conventional granulators face considerable problems when shredding long pipes and profiles. Pits or platforms are therefore often required to enable the long parts to be fed. ...

Centricut 22 #11627

• Manufacturer: Other Manufacturer

Cross section approx. 400×400 mm Use: Plastic | Rotor diameter: 220 mm | Rotor width: 160 mm | Rotor knives: 3 | Stator knives: row 2 | Motor drive: 6,5 kW

Shredder

Item Description/Artikelbeschreibung: Lot consists of: (1) Shredder Position besteht aus: (1) Schredderanlage Further Information/Weitere Informationen The Auctioneer shall not be responsible for the correct desc...

ZERMA GSL 200/270

• Manufacturer: Zerma

Cross section approx. 200 x 270 Use: Plastic | Rotor diameter: 200 mm | Rotor width: 270 mm | Rotor knives: 3×6 | Stator knives: 2 | Motor drive: 3 kW

ZERMA SM 812-7-3 #13253

• Manufacturer: Zerma

Cross section approx.1200 x 800 mm Use: Plastic | Rotor diameter: 800 mm | Rotor width: 1200 mm | Rotor knives: 7 rows | Stator knives: 3 rows | Motor drive: customer’s requirements

ZERMA GS 300/400 N #13206

• Manufacturer: Zerma

Cross section approx. 300 x 400 mm Use: Plastic; Wood | Rotor diameter: 300 mm | Rotor width: 400 mm | Rotor knives: 3 | Stator knives: 2 | Motor drive: 15 kW

Dreher S26/82 GFS-RS #13222

• Manufacturer: Dreher

Cross section approx. 820 x 260 mm Use: Plastic; Other | Rotor diameter: 260 mm | Rotor width: 820 mm | Rotor knives: 5 Reihen je 2 Messer | Stator knives: row 2 Reihen je 2 Messer | Motor drive: 18,5 kW

Herbold SM 45/60 #13064

• Manufacturer: Herbold

Cross section approx. 600×600 mm Use: Plastic; Wood; Other | Rotor diameter: 450 mm | Rotor width: 600 mm | Rotor knives row: 5 | Stator knives row: 2 | Motor drive: 55 kW