Used Lathes in Germany

HBM 360 X 1000 DRO Lead and Pull Spindle Lathe

Professional Industrial Machine (230Volt) 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Face plate 280mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot bra...

UWM 320 X 900 /DRO Lead and Pull Spindle Lathe

• Manufacturer: Tornos

SINO Digital Display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 250mm Fixed bezel Quick-change steel holder with 4 pcs steel holder Machine Light Chip tray, chip protection wall Hardened and groun...

UWM 400 X 1000 DRO Lead and Pull Spindle Lathe

• Manufacturer: UWM

3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face plate 320mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake Removable chip tray, chip protection wa...

HBM 400 X 1000 DRO Lead and Pull Spindle Lathe

3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face plate 320mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake Removable chip tray, chip protection wa...

MEUSER M-III-S Lead and Pull Spindle Lathe

• Manufacturer: Meuser

Spindle speed: from 16 to 800 rpm Turning length: approx. 3000mm Center height above bed: 380 mm Turning diameter over bed: 760 mm Center height over support: 250 mm Turning diameter over support: 500 mm Spindle ...

VDF HEIDENREICH & HARBECK V 3 Lead and Pull Spindle Lathe

• Manufacturer: Heidenreich & Harbeck

Machine number: 80-0121-3324 Operating voltage: 380V Rated current: 17A Center length: 1500mm Center height above bed: 280 mm Turning diameter over bed: 560 mm Center height over support: 160 mm Turning diameter ...

L+Z Lathe PONAR

• Manufacturer: PONAR

Nameplate not found, top height: approx. 150 mm, center distance: approx. 950 mm, with 3-jaw chuck, tailstock, tool holder, ATTENTION: pickup for this position by arrangement!!!

2008 L+Z Lathe CW 62123

Centers distance: 3,000 mm, center height: approx. 620 mm, 4-jaw chuck, tailstock, digital position display SILO SDS6-3V, 3 engraving rings, worktable 2 levels with various clamping devices, bearing frame with va...

INDEX MC400 CNC lathe with bar feeder

X - 200 mm Z - 600 mm C - Axis 0.001° Accuracy Tool turret with drive device with extensive accessories

1962 CELTIC 14 Lead and Pull Spindle Lathe Conversion

Conversion to a tube deburring machine Turning length 600 mm, turning diameter 350 mm, offset 175 mm long without cross-support!

UMA 15 Lathes

Turning length approx. 400mm, MULTIFIX "A" steel holder, including accessories in the tool cabinet

GORNATI - LEGOOR 300 - Lead and Pull Spindle Lathe

Machine must be dismantled by yourself! A 10 ton overhead crane is available

2009 L+Z turning machine JET GH-26120ZH

• Manufacturer: JET

Weight: 4,250 kg, Swing overBed: approx. 330 mm, Distance between centers: approx. 3,000 mm, 3-jaw chuck, tailstock, digital position display, 2 dials, ATTENTION: Pickup for this position by arrangement!!!

FAT TUR 630 MN Cycle Lathe - 2002

• Manufacturer: TuR

Machine number: 020548 Control: SIEMENS SINUMERIK Turning length: 3000mm Maximum diameter of the passage above the bench: 630 mm Max. distance between the tips at a turning length of 950 mm: 1000 mm at 1450 mm: 1...

ZERBST - DP05/W08 - Head lathe - 1985-2010

Machine data: Stock number: 2026-1376 Machine Type: Head Lathe Make: ZERBST Type: DP05/W08 Year of construction: 1985 – 2010 Control Type: CNC Control: Siemens Sinumerik 840D-sl Location: Camp Hattingen ...