Used Lathes in Germany

2009 REM - Bacau Series 320i Model A
- Manufacturer: REM
- Model: SERIES 320I MODEL A
Control: Fanuc | Freight basis: Ex Site - factory | Faceplate diameter: 3000 mm | Swing diameter: 3500 mm | Turning height: 3200 mm | Slide adjustment: 1750 mm | Ram head dimension: 300x300 mm | X-axis: 2700 mm ...
Monheim am Rhein, Germany
Trusted Seller
1977 RACINE / Gildemeister Gildemeister ASH 190
- Manufacturer: Gildemeister
- Model: ASH 190
feed pressure ? bar liter capacity ? l tank ca. 100 l power capacity 4 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 1,2*0,8*1,6 m
Gorxheimertal, Germany
2020 TITAN SC 32 CNC
- Manufacturer: Titan
- Power requirement: 80 kW
Overhauled and modernized in 2020 with new electrics, CNC control, Siemens drives etc. equipped with: - CNC control Siemens 840Dsl - 2 ram
Monheim am Rhein, Germany
1988 CARNAGHI AS 65 CNC
- Manufacturer: CARNAGHI
- Power requirement: 150 kW
Retrofit in 2015 - CNC control Siemens 840D (2 control panels) - faceplate - 2 rams: -- ram for turning operations with 12-fold tool changer (UTS 63) -- ram with grinding device - protective housing - Coolant
Monheim am Rhein, Germany
2011 RAFAMET KCF 320/400N
- Manufacturer: RAFAMET
equipped with: - CNC Control SIEMENS SINUMERIK 840D SolutionLine - C-axis (angular positioning of the table) - S1-axis (table positioning measurement) - Table large-size rolling bearing - Table jaws 4 pcs with ra...
Monheim am Rhein, Germany
1981 DOERRIES SH 600/6500
- Manufacturer: DOERRIES
equipped with: - CNC control NUM (for 4 axes) - Siemens electrics - 2 rams - 2 operating platforms
Monheim am Rhein, Germany
1997 CARNAGHI MARIO TMC 14 CNC
- Manufacturer: Mario Carnaghi
- Model: TMC 14 CNC
- Power requirement: 55 kW
CNC control Siemens Sinumerik 840 D 1 ram on crossrail
Monheim am Rhein, Germany
1978 DOERRIES SDE 600
- Manufacturer: DOERRIES
CNC retrofit in 1994, machine has CNC indexing and a universal milling and drilling drive that it can drill and mill on any angle and is equipped with: - CNC Control Siemens 840C - Table drive motor = Siemens 15...
Monheim am Rhein, Germany
2009 PIETRO CARNAGHI AC 20 TM 1800
- Manufacturer: Pietro Carnaghi
- Model: AC 20 TM 1800
Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5...
Monheim am Rhein, Germany
2019 Spinner TC 800 85 MCY
- Manufacturer: Spinner
Control: Siemens 840 D Shopturn | Available after: sofort / now | Max. turning length [mm]: 900 | Turningdiameter [mm]: 500 | Max. revolution [rpm]: 4.000 | Bar capacity [mm]: 85 | X-axis [mm]: 360 | Y-axis [+/-...
Oestrich-Winkel, Germany
2006 DMG GMX 200 linear
- Manufacturer: DMG Mori
Control: Siemens 840D | Max. swing over bed [mm]: 560 | Turningdiameter [mm]: 400 | Spindle speeds [rpm]: 0 - 4.000 | Spindle power [kw]: 13,2/22 | Torque [nm]: 750 | Max. revolution [rpm]: 12.000 | X-axis [mm]:...
Oestrich-Winkel, Germany
IEMCA PRA 40/42 .de
- Manufacturer: Iemca
- Model: PRA
Materiallänge: 4200 mm Gesamtlänge: 4,50 m Inventar Nr.: 000-014 Versandkosten: min. 750€ (Versandkostenpreis ist individuell zu betrachten, durch die Zusammensetzung von Verpackungskosten, Handling-Kosten und Sp...
Plettenberg, Germany
Trusted Seller
LOT / Soft - Hard jaws for three-jaw chuck / basic grip
SET / Soft - Hard Jaws for Three-Jaw Chucks / Base Holder Tool Holders / Sleeves / T-Slot Nuts -21x Set of Soft Jaws (Special Jaws) Hard Jaws for Three-Jaw Chucks -Jaw dimensions LxW 120x60mm 60 degrees - Serrati...
Bruchsal, Germany
Trusted Seller
1980 VOEST DA 180
- Manufacturer: Voestalpine
- Model: DA 180
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Turning diameter over bed: 230mm | Turning diameter over slide: 120mm | Center distance: 800mm | Spindle spe...
Günzburg, Germany
Trusted Seller
NARDINI MS 175E
- Manufacturer: Nardini
- Model: MS 175E
Control: conventional - | Freight basis: Delivery ex warehouse Günzburg. | Turning diameter over bed: 350mm | Center height: 175mm | Center distance: 800mm | Turning speeds: 25-2000U/min
Günzburg, Germany
Traub A15 Lathe
- Manufacturer: Traub
- Model: A15
Good condition Traub A15 Lathes manufactured in 1972. Located in Germany and other countries. Click request price for more information.
Germany