Used Machine Tools in Saxony, Germany

RÖHM clamping device

• Manufacturer: Röhm

Clamping device with 3-jaw chuck, 3-jaw chuck RÖHM Used!

WMW tension drive

• Manufacturer: WMW

Clamping drive, clamping force generator, electric WMW EDU I80 MT Motor: KMR 71 K 4 E 0.55 kW 1380 rpm 220/380 V 3AC used, checked!

WMW tension drive

• Manufacturer: WMW

Clamping drive, clamping force generator, electric, with fan WMW EDU I80 EL Motor: KMR 71 K 4 E 0.55 kW 1380 rpm 220/380 V 3AC used, checked!

WMW hydraulic cylinder

• Manufacturer: WMW

Hydraulic cylinder, single-acting, spring return WMW Hydraulic Cylinder for UPW 63 Spare part for WMW UPW 63! unused!

WMW tension drive

• Manufacturer: WMW

Clamping drive, clamping force generator, electric WMW EDU I80 M1 Motor: KMRB 71 G 4 F 0.75 kW 1380 rpm 220/380 V 3AC used, checked!

PAGUS bezel

• Manufacturer: Pagus

Bezel, bezel, steady rest, fixed PAGUS used, checked!

WMW tension drive

• Manufacturer: WMW

Clamping drive, clamping force generator, electric WMW EDU I160 Motor: KMR 71 K 2 E 0.75 kW 2800 rpm 220/380 V 3AC Mounting ring: diameter (inside /outside): Ø 137.8 /160 mm, width: 67 mm Internal thread: M140 x ...

WMW tensioning drive

• Manufacturer: WMW

Clamping drive, Clamping force generator, electric WMW EDU I160 Torque adjustable in 8 steps max. 110 Nm 160 rpm 220 /380V 3AC 0.75 kW Splined shaft profile according to TGL 0-5471 For more tensioning drives see ...

POREBA lunette

• Manufacturer: Poreba

Luenette, bezel, buttstock POREBA suitable for Poreba TPK-80! Used!

PAGUS Luenette

• Manufacturer: Pagus

Luenette, bezel, buttstock, fixed PAGUS Used! Inner diameter: Ø 350 mm | Center height: 460 mm | Foot: 540 x 200 mm | Hole distance: 330 mm | Counter pressure plate: 410 x 210 mm | Dimensions: 850 x 220 x 960 mm

WMW SP 5040x2230x460

• Manufacturer: WMW

Machine table can be used as clamping plate. - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55....

bolster plate AP 2500x1250x100 (Nr.1-2)

Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 th...

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 250 x 3 ( DH250x3 ) TGL 30-2333 used, tested!

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chucks, three-jaw chucks, power chucks, wedge hook chucks WMW ( DKRDA250x3 ) Jaws individually adjustable by toothing ! with accessories ! used, tested !

FIXATOR leveling range

• Manufacturer: Pagus

Bench leveling range for machine feet e FIXATOR 7 pieces Ø 100 mm x 1 mm, with slot 24 mm 8 pieces Ø 100 mm x 2 mm, with 24 mm slot 1 piece Ø 100 mm x 4 mm, with 24 mm slot 1 piece Ø 100 mm x 5 mm, with 24 mm slo...