Used Machine Tools in Schleswig-Holstein, Germany

1988 HILGELAND LIZENZ CH00KH

• Manufacturer: Hilgeland

Diameter range: 1-4 mm | Shaft length under head: 20 mm | Max. cutting length: 36 mm | Output- piece/min: 460

1985 SAKAMURA NP-410

• Manufacturer: Sakamura

Diameter range: 6 mm | Number of dies: 4 | Number of stations (incl. cut off): 5 | Max.width across flats: 6 mm | Output – pieces/min: 350 | Cutting length: 4 mm | Thread diamter: M2-M3

2008 SACMA KSP11R

• Manufacturer: Sacma

Diameter range: 7 mm | Thread dia. range: 8 mm | Cutting length: 80 mm | Number of stages: 2 | Output – pieces/min: 300 | Press power: 270KN

1974 Carlo Salvi RF/SV

• Manufacturer: Carlo Salvi
• Model: RFSV

Diameter range: 0,8-3,0 mm | Cutting length: 30 mm | Shaft length under head: 25 mm | Output – pieces/min: 600

1988 NAKASHIMADA NS60E

• Manufacturer: Nakashimada

Diameter range: 6 mm | Cutting length: 95 mm | Shaft length under head: 75 mm | Output – pieces/min: 200

1995 SACMA KSP01R

• Manufacturer: Sacma

Diameter range: 2-5 mm | Shaft length under head: 5-40 mm | Max. cut-off length: 60 mm | Output pieces/min: 400 | Max. thread length: 38 mm

1978 NATIONAL 8L4

• Manufacturer: National
• Model: 8L4

Diameter range: 12 mm | Number of dies: 4 | Number of stations (incl. cut off): 7 | Cutting length: 127 mm | Shaft length under head: 95 mm | Output – pieces/min: 185 | Max. thread length: 80 mm

Plasma cutting machine Daewoo DWCUT120

• Manufacturer: Daewoo

Rated power: 19 kVA Rated current: 29 A No-load voltage: 280 V Output current adjustment: 30-120 A Rated output voltage: 128 V Max cutting thickness: 45 mm; Cyclic duration factor: 60% Efficiency: 80% Insulation ...

Welding machine Daewoo DAMIG-350GDL

• Manufacturer: Daewoo
• Model: DAMIG350GDL

Voltage: 380 - 400 V Phase: 3 Hertz: 50 Hz Output current: 40 - 350 A Duty cycle: 80% Welding wire: 0,80 - 1,2 mm Welding plate thickness: 0,5 - 12 mm Accessories: Gas protected welding gun (5 mm) European plug (...

Welding machine Daewoo DAMIG-350GDL

• Manufacturer: Daewoo
• Model: DAMIG350GDL

Voltage: 380 - 400 V Phase: 3 Hertz: 50 Hz Output current: 40 - 350 A Duty cycle: 80% Welding wire: 0,80 - 1,2 mm Welding plate thickness: 0,5 - 12 mm Accessories: Gas protected welding gun (5 mm) European plug (...

Hydraulic hose crimping machine Daewoo DA5100-HC

• Manufacturer: Daewoo

crimping range 15-63mm max opening 75mm pressure 53,5 Mpa kracht 500 T 3000W 380V

ROBUST HABICHT & HEUSER B40 Slitter Rewinder and Winding Machine

- Slitter rewinder and winding machine for industrial use - Precise cutting, rewinding and reuse of material rolls - Suitable for continuous operation in a 3-shift system - Winding station: double winding axis (t...

2019 TRUMPF TruLaser 1040 Fiber (L88X

• Manufacturer: Trumpf
• Model: TruLaser
• Cutting thickness: 30 mm

Machine - Field of action of 4000 x 2000 mm - Closed buildings - Semi-automatic pallet changer (without light barriers) - Guidance of the laser beam by optical fiber - Axes driven by linear motor technology - Coo...