Used Machine Tools in Bavaria, Germany

Trusted Seller
AK-BEND AHS 30/04
- Manufacturer: Ak-Bend
- Power requirement: 7.5 kW
Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bea...
Günzburg, Germany
Trusted Seller
AK-BEND AHS 30/13
- Manufacturer: Ak-Bend
- Power requirement: 11 kW
Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bea...
Günzburg, Germany
Trusted Seller
BURNET CFMT 2560 x 4,0
- Manufacturer: BURNET
- Maximum thickness: 2 mm
- Power requirement: 7.5 kW
Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted ...
Günzburg, Germany
Trusted Seller
AK-BEND APK 81
- Manufacturer: Ak-Bend
- Model: APK 81
Domestic equipments: - Welded steel structure (St-52) - Rollers are driven by 3 separate hydraulic motors - Stepless speed - Special steel gears - Shafts are made of special steel, hardened and ground - Manual lu...
Günzburg, Germany
Trusted Seller
1984 MUBEA HP 450/760
- Manufacturer: Mubea
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Hole diameter in sheet thickness: Ø 19 in 19mm | Pressure capacity max.: 45to | Weight of the machine approx...
Günzburg, Germany
Trusted Seller
2012 ERCOLINA TOP-030
- Manufacturer: Ercolina
- Model: TOP-030
Control: Ercolina | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Machine weight.: 170 kg
Günzburg, Germany
Trusted Seller
TOS – MAS VO 50
- Manufacturer: TOS
- Model: VO 50
- Power requirement: 4 kW
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Bore capacity in steel (diameter): 60mm | Center of spindle to wall or column: min./max. 320 - 160mm | Spind...
Günzburg, Germany
Trusted Seller
NARDINI MS-175E
- Manufacturer: Nardini
- Spindle bore: 46 mm
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Distance between centers: 800mm | Spindle bore: 46mm | Turning speeds: 18 , stepped 25 - 2000 rpm | Total po...
Günzburg, Germany
Trusted Seller
2018 Ercolina CE50MR3
- Manufacturer: Ercolina
- Model: CE50
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Shank diameter: 50mm | Roll diameter: 178mm | Roll speed: 9U/min | Engine: 1,85kW | Machine weight.: 390kg
Günzburg, Germany
Trusted Seller
WEILER VS2
- Manufacturer: Weiler
- Spindle bore: 36 mm
Control: conventional - | Storage location: Günzburg | Turning speeds: 15-3550U/min | Turning length: 500mm | Spindle bore: 36mm | Spindle head: Size 5 (DIN 55022) | Great pass over the bed: 297mm | Swing diamet...
Günzburg, Germany
Trusted Seller
2001 BERNARDO RD 1600×50
- Manufacturer: Bernardo
- Model: RD 1600
- Power requirement: 4 kW
Control: conventional - | Storage location: Location | Arm length: 350-1590mm | Bore capacity in steel (diameter): 50mm | Spindle taper: MK5 | Threading: M42 | Quill stroke: 320mm | Total power requirement: 4kW ...
Günzburg, Germany
Trusted Seller
ZOPF ZB 110/3H
- Manufacturer: Zopf
- Power requirement: 3.7 kW
Accessories / equipment: - Three driven rollers with a smooth surface - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tap...
Günzburg, Germany
Trusted Seller
AK-BEND APK 35
- Manufacturer: Ak-Bend
- Model: APK 35
- Power requirement: 1.5 kW
Domestic equipments: - Extended special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working - CE mark / Declaration ...
Günzburg, Germany
Trusted Seller
1970 Kolbus HL
- Manufacturer: Kolbus
Head & Tail Banding Machine Kolbus HL Head & Tail Banding Machine Kolbus HL Year 1970 Format / Size min. 125 x 100 x 6mm / max. 370 x 270 x 80mm Performance / Speed up to 36 cycles/min. Consisting of / Consist of...
Emskirchen, Germany
Trusted Seller
2024 Bodor P3 12 KW BP-B00001
- Manufacturer: Bodor
The Bodor P3 is a powerful demonstration machine with an impressive laser output of 12 kW and a robust shuttle table that can handle loads of up to 1450 kg. With an acceleration of 4g, it is particularly fast and...
Olching, Germany