Used Machine Tools in Saxony, Germany

WMW ALU 4200x2000

• Manufacturer: WMW

Aluminum plate with 800 clamping holes, M8; countersunk Ø 11,5 x 15mm with 4 clamping holes, M24 The plate is placed on a wooden support frame.

WMW ALU 4000x1700

• Manufacturer: WMW

Cast aluminum plate, finished This plate can be used for assembly work on both sides. Numerous clamping holes (M8) evenly arranged on the plate. By means of lift/chassis (welded/screwed) the aluminum plate stands...

STOLLE AP 5500x2150x340

• Manufacturer: STOLLE

Material cast steel Milled, finished surface T-slots according to DIN 650: a=28; h=46; b=48; c=21mm Center distance 150 / 230 mm

bolster plate AP 5500x1890x380

3 clamping plates (price per plate) Weights: No. 1 = 8000kg; No. 2 = 9000kg; No.3 = 8500kg Material: Cast iron T-slots according to DIN 650 Slots lengthwise Number 6 Size a=36mm,h=64mm,b=60mm,c=25mm Center distan...

bolster plate AP 2000 x 1500 (Nr.1 - Nr.6)

There are 6 of these clamping plates for sale. (price per piece) Material cast steel/profile casting T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm 4x passage holes Ø 90 mm 10x f...

J+P pneumatic punch

Pneumatic punch press J+P, JAGOW + PFEIFER GmbH STZ-KO Used, tested!

VAN MARK cooling slot punch

Cooling slit punch, Slit punch, Hand lever punch VAN MARK PRODUCTS CORPORATION TRIM-A-LOUVER used, tested !

WMW AW 330x310

• Manufacturer: WMW

Application: Machine table adjustable clamping angle with 3 T-slots according to DIN 650: a=17; H027; b=32; c=14mm distance 100mm swivelling via tooth guide +90° rotatable 360° Base Ø 350mm with 2x clamping groov...

ROTO RECORD 4 jaw chuck

• Manufacturer: ROTO RECORD

4-jaw chuck, four-jaw chuck ROTO RECORD, WMW DH 315 x 4-II ( DH315x4-II ) used, tested!

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 200 x 3 - III ( DH200x3-III ) TGL 30-2333 3x threaded hole: M10 x 1.5, depth: 30 mm used, tested!

PAGUS 3-jaw chuck

• Manufacturer: Pagus

3-jaw chuck, three-jaw chuck, power chuck, wedge-hook chuck with adapter PAGUS without baking ! Used!

SMW 3-jaw chuck

• Manufacturer: SMW

3-jaw chuck, three-jaw chuck, power chuck, wedge bar chuck SMW HFK 160-45 (HFK165-45) Flange diameter: Ã 138 /140 mm, length: 3 /8 mm 3x bore (continuous): Ø 17 /11 mm, length: 17 /100 mm Wedge bar drive thread: ...

FORKARDT three-jaw chuck

• Manufacturer: FORKARDT

3-jaw chuck, three-jaw chuck, power chuck FORKARDT 3KTG 200 Hole circle 1: Ø 150 mm, 6x M10 x 1.5, depth: 22 mm Hole circle 2: Ø 135 mm, 3x Ø 12.5 /24 mm, depth: 42 mm without baking! used, checked!

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW Used! Outside ø: 315 mm | Bolt circle ø: 275 mm | Bore ø: 100 mm | Height with jaws: 115 mm | Dimensions: 320 x 320 x 120 mm

WMW 3-jaw chuck lining

• Manufacturer: WMW

3-jaw combination feed, three-jaw chuck with individually and centrally adjustable jaws WMW, ROTO RECORD Used!