Used Rolling Mills (Metalworking) in Germany

BÜHLER Cold rolling
- Manufacturer: Bühler
underfloor coil car decoiler with hold-down arm and stripper plate carry-over table reversing coiler "left" with stripper plate underfloor coil car "left" mill guide "left" with thickness measuring gauge mill ...
Freudenberg, Germany
1980 ANDRITZ/ SUNDWIG Cold rolling
- Manufacturer: Andritz
Strip width: 100 - 320 mm | Strip thickness: 3 – 0,07 mm | Coil od: max. 1.050 mm | Coil weight: max. 2 t | Speed: max. 500 m/min | Working direction (1st pass): left → right
Freudenberg, Germany
1975 CARL WEZEL BW 300 / 350
- Manufacturer: CARL WEZEL
decoiler mill guide "left" mill stand mill guide "right" recoiler with stripper plate hydraulics electrics
Freudenberg, Germany
1980 LISSE 17/50
- Manufacturer: LISSE
height adjustment top levelling rolls: electromotive swivelling adjustment top levelling rolls: manual tilting adjustment top levelling rolls: manual deflection bottom levelling rolls: electromotive
Freudenberg, Germany
1984 BLEMA GOTHA UBR 4 x 1.250
- Manufacturer: Blema
supports top/ bottom backup rolls top/ bottom height adjustment of bottom rolls tilting adjustment of bottom rolls swivelling adjustment of bottom rolls adjustment of upper supports main drive
Freudenberg, Germany
1980 BLEMA GOTHA UBR 10/1 x 2.000
- Manufacturer: Blema
no. of levelling rolls: 13 levelling roll-Ø: 140 mm
Freudenberg, Germany
HENGSTEBECK Levelling
- Manufacturer: HENGSTEBECK
No. of levelling rolls: 5 + 1 levelling roll Ø: 100 mm
Freudenberg, Germany
1980 BLEMA GOTHA UBR 20 x 1.600
- Manufacturer: Blema
no. of supports on top/at the bottom: 3/3 height adjustment of bottom rolls: electro-mechanic tilting adjustment of bottom rolls: without
Freudenberg, Germany
1980 BLEMA GOTHA UBR 5,6 x 2.000
- Manufacturer: Blema
no. of supports on top/at the bottom: 5/5 height adjustment of bottom rolls: electro-mechanic tilting adjustment of bottom rolls: electro-mechanic hydraulics electrics
Freudenberg, Germany
1956 UNGERER 1500/2,5/17
- Manufacturer: Ungerer
- Model: 15002517
supports on top/ at the bottom backup rolls on top/ at the bottom height adjustment of cross beam tilting adjustment of cross beam swivelling adjustment adjustment of bottoms supports (bending) adjust...
Freudenberg, Germany
1980 SCHNUTZ RM F2 90/17-200
- Manufacturer: SCHNUTZ
supports top/bottom drive Strip width: 50 - 200 (250) mm | Strip thickness: 2 - 10 mm | Speed: approx. 15 m/min. | Working direction: any | Design: alligator | No. of levelling rolls: 17 | Levelling roll ø: 90 ...
Freudenberg, Germany
1975 WEAN DAMIRON Levelling
- Manufacturer: Wean
height adjustment bottom levelling rolls: electromechanical swivelling adjustment bottom levelling rolls: electromechanical tilting adjustment bottom levelling rolls: electromechanical deflection bottom levelling...
Freudenberg, Germany
UNGERER Levelling
- Manufacturer: Ungerer
height adjustment top levelling rolls: manual swivelling adjustment top levelling rolls: manual tilting adjustment top levelling rolls: manual adjustment bottom levelling rolls: manual
Freudenberg, Germany
1989 SCHLEICHER RMS 8/53/96-320
- Manufacturer: Schleicher
No. of levelling rolls top/bottom: 8 Strip width: 50 - 320 mm | Strip thickness: 0,4 – 3 mm | Strip cross section: 480 mm² | Levelling roll ø: 53 mm | No. of supports top/bottom: 1/1 | No. of pinch rolls: 2 | Pin...
Freudenberg, Germany
1975 UNGERER Levelling
- Manufacturer: Ungerer
support height adjustment swivelling adjustment adjustment of backup rolls main drive circulation system lubrication
Freudenberg, Germany