HOLZMANN WP 75 H #1077-HDM0053
- Manufacturer: Holzmann
No.: 100091216 The technical data are manufacturer or operator information and therefore non-binding for us. We reserve the right to make a further sale; only our terms and conditions apply. About us more than...
Dorsten, Germany- Trusted Seller
2005 Komatsu E2G 400
- Manufacturer: Komatsu
- Model: E2G400
- Stroke length: 500 mm
- Daylight: 1,250 mm
without cushion moving bolster left to right 2 moving bolster
Gammertingen, Germany - Trusted Seller
1974 SCHULER E4-500
- Manufacturer: Schuler
- Stroke length: 500 mm
- Shut height: 980 mm
With moving bolster left to right Pressure total: 500 ton | Ram stroke: 500 mm | Slide adjustment: 500 mm | Shut height (stroke down, adjustment up): 980 mm | Free frontal opening l-r: 2900 mm | Table surface are...
Gammertingen, Germany - Trusted Seller
Polam PZPE Kostuchna PH 4 AL
- Manufacturer: Polam PZPE Kostuchna
- Stroke length: 15 mm
Pneumatic Cable Terminal Press - application: press of cable terminal on electrical cable and air-conditioning lines futher details: - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length...
Leipzig, Germany - Trusted Seller
1985 ARKU RM 3025.4/9
- Manufacturer: Arku
- Pneumatic clamp roller - Manual disc brake Decoiler with arm: 1,5 ton | Material width: 250 mm | Coil exterior diameter: 1.200 mm | Expansion range: 370 - 430 mm | Speed: 0 - 20 m / min | Number of levelling ro...
Gammertingen, Germany - Trusted Seller
2005 Komatsu E2G 400
- Manufacturer: Komatsu
- Model: E2G400
- Stroke length: 500 mm
- Daylight: 1,250 mm
2 cushion cylinder 2 pads moving bolster left to right 2 moving bolster
Gammertingen, Germany - Trusted Seller
Komatsu 500 QP - 5125
- Manufacturer: Komatsu
- Stroke length: 500 mm
- Daylight: 1,350 mm
2 cushion cylinder 1 pad moving bolster right to left
Gammertingen, Germany - Trusted Seller
1974 SCHULER E4-600-3.3-762
- Manufacturer: Schuler
- Stroke length: 762 mm
- Shut height: 1,322 mm
With moving bolster front to back Pressure total: 600 ton | Ram stroke: 762 mm | Slide adjustment: 406 mm | Shut height (stroke down, adjustment up): 1322 mm | Free frontal opening l-r: 3700 mm | Free lateral ope...
Gammertingen, Germany - Trusted Seller
1997 KAISER V 315 WR 2740
- Manufacturer: Kaiser
- Model: V 315 WR 2740
- Stroke length: 160 mm
- Shut height: 1,050 mm
hydraulic tool clamping device Tool changing cart Pressure total: 315 ton | Ram stroke: 160 mm | Slide adjustment: 100 mm | Shut height (stroke down, adjustment up): 1.050 mm | Free frontal opening l-r: 2.740 mm ...
Gammertingen, Germany - Trusted Seller
Polam PZPE Kostuchna PH 6 AL
- Manufacturer: Polam PZPE Kostuchna
- Stroke length: 20 mm
pneumatic cable terminal press - application: press of cable terminal on electrical cable and air-conditioning lines futher details: - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length...
Leipzig, Germany - Trusted Seller
2002 KUHNE MASCHINENBAU KEPK-1
- Manufacturer: Kuhne
Orbital Cold Forming Machine! - Not not suitable for screw production!!!!!!! - mechanic cold flow press / machine is unused!!!! - Steel core bullets - Rivets (almost all types: flat rivets, punch rivets, precisio...
Leipzig, Germany - Trusted Seller
2005 HERA HC 3
- Manufacturer: Hera
- Model: HC 3
- Stroke length: 130 mm
- Power requirement: 1.1 kW
HORIZONTAL HYDR.PRESS - operation through keyboard - operating pressure: 10 to 600bar stepless adjustable - work piece clamping area is adjusted through manual screwing of slide-counter holding plate - sizes of c...
Leipzig, Germany - Trusted Seller
1982 HANS SCHOEN SH-C 16
- Manufacturer: Schoen
- Stroke length: 250 mm
- Power requirement: 3 kW
Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pr...
Leipzig, Germany - Trusted Seller
1981 Reis SEP 6-30S
- Manufacturer: Reis
- Model: SEP 6-30S
- Daylight: 650 mm
- Power requirement: 11 kW
Four-column press, hydraulic Possible applications: can be used as a deburring press Further technical features: - Table aperture 200x250mm - Opening in ram Ø 160mm - Passage in the column width 600 and depth 450...
Leipzig, Germany - Trusted Seller
2022 Rodcraft WP30P
- Manufacturer: Rodcraft
- Stroke length: 142.5 mm
Simple hydraulic double column press - special construction welded from 20mm sheet steel. Table support with prism 260 x 205mm Lower beam installation height max./min.: 1031 / 151mm Table height above floor max./...
Leipzig, Germany
Tip: Enter manufacturer, model or keyword
