Used Presses in Germany

1999 SACMA SP260

• Manufacturer: Sacma

Info: bushing cut-off | Diameter range: 10,5 mm | Number of dies: 5 | Number of stations (incl. cut off): 6 | Cutting length: 85 mm | Shaft length under head: 65 mm | Output – pieces/min: 275 | Press power: 65t

screw press

Pressing force [kN]: 100 Table size [mm]: 600 x 100 Installation height [mm]: 200

1980 HATEBUR BKA3

• Manufacturer: HATEBUR

Info: PKO | Diameter range: 8-18 mm | Number of dies: 4 | Number of stations (incl. cut off): 5 | Cutting length: 150 mm | Shaft length under head: 130 mm | Output – pieces/min: 90 | Press power: 180 to

1995 NATIONAL FORMAX FX35CF

• Manufacturer: Formax

Info: bushing cut-off , PKO , Forma packs | Diameter range: 11,8 mm | Number of dies: 5 | Number of stations: 6 | Cutting length: 3 – 45 mm | Shaft length under head: 50 mm | Output – pieces/min: 85 – 255 | Pres...

1986 SAKAMURA BPF560S

• Manufacturer: Sakamura

Info: bushing cut-off , PKO , IFO , Slug feeding possible | Diameter range: 16-34 mm | Number of dies: 5 | Number of stations: 6 | Cutting length: 210 mm | Shaft length under head: 180 mm | Output – pieces/min: ...

1978 NEDSCHROEF BMV 7

• Manufacturer: Nedschroef

Info: bushing cut-off | Diameter range: 16-27 mm | Number of dies: 4 | Number of stations: 7 | Cutting length: 50-240 mm | Shaft length under head: 30-180 mm | Range of thread length: 95 mm | Max. width acros fl...

1976 HATEBUR BKA5

• Manufacturer: HATEBUR

Info: bushing cut-off , PKO 95 mm | Diameter range: 16-36 mm | Number of dies: 4 | Number of stations: 5 | Cutting length: 30 – 260 mm | Shaft length under head: 30 – 220 mm | Output – pieces/min: 35-70 | Press ...

WMT 4 TON. Printing and repair kit

Hydr. Dent / Damage Repair Kit This comprehensive dent set is indispensable for many repairs. The dent set is fully filled with many quick couplings, so you can get started right away. Bending, pushing, straighte...

WMT 10 TON. Printing and repair kit

Hydr. Dent / Damage Repair Kit This comprehensive dent set is indispensable for many repairs. The dent set is fully filled with many quick couplings, so you can get started right away. Bending, pushing, straighte...

hydraulic press / 2 telescopical piston

• Manufacturer: hydraulic press / 2 telescopical piston

oil suction one side, lift way total ap. 5400 mm, cylinder outside Ø ap 160 mm, largest length ap. 3400 mm good

PEMSERTER SERIES 4 press-fit machine

Punch pressure 1.8 to 53.4 kN, drive type air, air connection max. 6 bar, projection 457, height 1,676 mm, width 690 mm, depth 940 mm, weight approx. 308kg

Hydraulic press Neff 4 S20Z

• Manufacturer: Neff

Pressing force [kN]: 40 Table size [mm]: 320 x 220 Installation height [mm]: 200 mm

Hydraulic press, C-frame WMW Zeulenroda PYE 100SS

• Manufacturer: Zeulenroda
• Model: PYE 100

Hydraulic press, C-frame WMW Zeulenroda PYE 100SS

• Manufacturer: Zeulenroda
• Model: PYE 100

2022 CLAAS baler-wrapper combination 454 Uniwrap

• Manufacturer: Claas

Press winding combination 454 Uniwrap with rotor 25 blades K80 hitching Cardan shaft ISOBUS with extra terminal Tire 620/55 R 26.5 with winding table PickUp 2.2m Bale baler 9215 Bale