Used Printing in Brandenburg, Germany

2009 Ernst Nagel Docufold

• Manufacturer: Nagel
• Model: DOCUFOLD

The pocket adjustment here is only by hand wheel from the outside and can be readjusted in seconds, also the donning and doffing is done on the same side. The folding rollers adjust themselves to the paper thickn...

2007 Bograma BS Eco 350-160-15

• Manufacturer: Bograma

Double Bridge Punch BS Eco 350-160-15 from 2007 Consisting of 1 infeed table with inline head or foot trim and then 2 Separating cut for multiple-up one long shed delivery SAB 550 for multiple use

Double nose shears for cutting Cito and GNU channel grooves

Double nose shears for cutting Cito and GNU channel grooves for efficient cutting of overhangs and for straight cutting of lines up to 40 x 1.42 mm in all-steel construction. The shear cuts 2 lugs at the same tim...

2008 Desta Desta BAS-STB 600

• Manufacturer: Desta
• Model: BAS-STB 600

Working width 600mm two pairs of press rolls height adjustable and inclinable inlet

2004 BVM A 3535

• Manufacturer: BVM

for automatic feeding of magazines, catalogs, blocks into the packaging machine Technical data size max: 350 x 350 x 30mm 350 x 280 x 50mm

2002 Mathias Baeuerle MB CAS 38-4-F

• Manufacturer: MB Bäuerle

Underfloor suction feeder Double sheet control and alignment table Total counter, preset counter Compressor 1. folding unit Multimaster CAS 38-4 with 4 folding pockets 38cm downstream cutter block motorized shed ...

2007 Mathias Baeuerle multimaster CAS 35-2 PBA

• Manufacturer: MB Bäuerle
• Model: Multimaster

Folding at the touch of a button in the A3 range Year of manufacture 2007 Computerized folding machine with two automatic buckle plates AFT-35 with deflecting ruler Total and preset counters PUR foam rollers PBA ...

2013 Agfa Avalon N8-24

• Manufacturer: Agfa

semi automatic 8up thermal CtP Agfa Avalon N8-24 S (PTR-8600S) with Agfa Apogee Rip Year 11-2013 only 4346 exposure hours speed: 23 plates per hour manual plate plant bridge Advant MDT 480 in line plate punch (fo...

2019 Heidelberg Stahlfolder BUH 36-6

• Manufacturer: Heidelberg

2.station Heidelberg Stahlfolder BUH 36-6 with MCT Koppelbox from 2019 (condition as new) six folding pockets with infeed width 36cm 33 Roll diameter Infeed height 82cm

1985 Hunkeler RE – 320 VAR

• Manufacturer: Hunkeler

Register punching machine with two-color printing unit Cutting length 320 mm Cutting depth 80 mm Cutting thickness max. 10 mm Clamping thickness max. 50 mm Spine length max. 400 mm max. speed 70 strokes / min Too...

Muero ST 46×68

• Manufacturer: Müro

mobile with foot switch for ON/OFF and tilt adjustable for depositing and smoothing collated form sets and booklet layers as well as printed sheets Adjustable shaking force by means of adjustable unbalance nut on...

Heidelberg Stahlfolder coupling module CCT-MCT

• Manufacturer: Heidelberg

Heidelberg Stahlfolder coupling module CCT-MCT Part number 1224449174 Part. No. FH.1341491/00

2010 Heidelberg Stahlfolder TH-56

• Manufacturer: Heidelberg
• Model: Stahlfolder TH 56

Heidelberg Stahlfolder TH-56-4-4-RFH and SPH-70 Year of construction 2010 Sheet format 56 x 128 cm (W x L) Fully automatic device for buckle plates and rollers RFH 56 round pile feeder with table extension and to...

Side panels/protectors Heidelberg Stahlfolder

• Manufacturer: Heidelberg

Side panels right left Contactors for Heidelberg Stahlfolder buckle folding machine

Superblue anti-marking mesh for Heidelberg Speedmaster SM 52

• Manufacturer: Heidelberg
• Model: Speedmaster SM 52
• Size: 720 x 520 millimeter

Superblue anti-marking mesh for Heidelberg Speedmaster SM 52 Part. C-2.215.828