Used Printing in Brandenburg, Germany

2004 Polar Mohr Schneidelinie Polar 115 XT

• Manufacturer: Polar Mohr

Workflow: The material to be cut is brought to an optimum working height on the right side with a loading lift, placed in the jogger by the operator using the optional counting scale, and jogged there. and then t...

2012 Polar Mohr Eco 80

• Manufacturer: Polar Mohr

guillotine, stack cutter or paper cutter Polar Eco 80 with hydraulic drive and stainless steel air table from 2012 Cutting width 800 mm Insertion depth 800 mm Insert height max. 100 mm Machine operators appreciat...

1998 Planatol PLANAX TB 380

• Manufacturer: Planatol

max. 380 mm binding length max. 60mm block thickness Heating time approx. 15min up to 180 copies/h

Pfäffle punching tools Tools

• Manufacturer: Pfäffle

Pfäffle punching tools Tools

1999 Perfecta 92 TVC

• Manufacturer: Perfecta
• Model: 92 TVC

Working width and insertion depth 92cm TVC-Touch computer control with flash card reader Air table with large air side tables

2002 Muero 5000 A3 WT

• Manufacturer: Müro

This block glue press has a mobile base, hot air fan drying, heat deflector for uniform drying and press insert for small stacks. The advantage of the A3 press lies in its larger holding capacity for A 3 piles an...

2010 Muero 5000 A 3 TM (Tischmodell)

• Manufacturer: Müro

for DIN A 3 format or 2-pocket gluing of pads, form sets and A 5 brochures Accessories: press insert for small stacks Stacking height: 52.5 cm Press width: 52.5 cm Press depth: 32 cm Weight: approx. 29 kg

Mueller Martini PrintRoll P

• Manufacturer: Müller Martini

This Muller Martini double unwind for PrintRoll P Type 0350.0427 from year of manufacture 2001 (without reel stand and infeed modules for the feeders) is used for connecting to Muller Martini Prima, Tempo and Pri...

1986 Hans Mueller (Mueller Martini) 271

• Manufacturer: Müller Martini

Wire stitching machine (beater) for saddle stitching and block stitching max. block thickness 22mm (stabbed on one side) max. block thickness 35mm (engraved on both sides) 380 volt

1981 Mueller Martini 1509

• Manufacturer: Müller Martini
• Model: 1509

Format min. 90x98mm Format max. 365×305 mm Equipment: - 3 x double feeder 1516 - 1 x stapling station 1509 with 4 stapling heads - 2 ring eyelet staples - 1 x 1522 three-knife trimmer with center cutting device -...

1987 GUK Grieser & Kunzmann FA 52-4

• Manufacturer: Grieser & Kunzmann

mobile 2.tes folding unit GUK FA 52-4 but only 1 buckle plate is installed ! Year of manufacture 1987 mobile, so far in use at endless cutter Böwe 310 - Noise protection device - Cutting equipment Böwe 310 high-p...

2008 MKW Rapid SFT 350

• Manufacturer: MKW
• Model: Rapid SFT

Format: min. 10 x 14 cm , max. 35 x 50 cm Quick format adjustment Front trim with 6cm minimum trim over upper and lower knife Blow-off air on the knife Adjustable pressing device 2 stitching heads Hohner 48/S Sti...

Knife set three-knife trimmer Muller Martini 890

• Manufacturer: Müller Martini

2006 MBO T 530-4

• Manufacturer: MBO
• Model: T530
• Power requirement: 3 kW

4 combination folding pockets with 53 cm infeed width with noise protection and downstream slitter shaft Ruler stop as FW 2 shortenable special infeed height for unwinds and cross cutters

Matator 42 rebating machine perfect Elektromatic with tape dispenser

• Manufacturer: Matador

offers many folding possibilities: Smallest block spine width 2.5 mm Largest block spine width 25 mm Largest block length 420 mm Smallest belt width 15 mm Largest belt width 50 mm Pleat tape cover adjustable Abso...