Used Punch Presses in Germany

PAGUS Punch

• Manufacturer: Pagus

Punch PAGUS Punch Punching force approx. 4000 kg Installation height approx. 200 mm Table 300 x 300 mm 380 V used, tested !

Reiplinger hydraulic pneumatic punch for window fittings BSD-R6.6 SH-GR80 101598

• Manufacturer: Reiplinger

HÄWA hydraulic punching pumpCylinder stroke: 28 mm

• Manufacturer: HÄWA
• Stroke length: 28 mm

Hydraulic punching pump, foot-operated HÄWA Powerman Step used, tested !

1978 BRUDERER BSTA 25

• Manufacturer: Bruderer
• Model: BSTA 25
• Stroke length: 20 mm

Press force measurement and tool locking Siegfried incl. Bruderer BBV 202 feeder

1992 HAULICK & ROOS RVD 80 - 800 NS

• Manufacturer: Haulick + Roos
• Model: RVD 80

Roll feeder Type WAV - RDS 2E 1125 Material width max. 310 mm Material thickness 0,3 - 3 mm Material cross section 630 mm2 Feeding speed 80 m/min Feeding roll diameter 125 mm

2000 Bruderer BSTA 25 USL

• Manufacturer: Bruderer
• Model: BSTA 25
• Stroke length: 20 mm

used Bruderer BSTA 25USL high speed press with BBV 190/85 roll feed on left-hand side. - Tool loading width 750mm L-R - Adjustable stroke 13 to 38mm - Nominal capacity 25 tons - Acoustic cabin included (in d...

1980 BRUDERER(CH) BSTA 25

• Manufacturer: Bruderer
• Model: BSTA 25
• Stroke length: 20 mm

Punching press, hoist, noise protection cabin · BRUDERER system for complete mass balance through a transversal running eccentric shaft and an adjustable lever system. · BRUDERER band feed device mounte...

1985 BRUDERER(CH) BSTA 25

• Manufacturer: Bruderer
• Model: BSTA 25
• Stroke length: 20 mm

Punching machine, winch, noise protection cabin · BRUDERER system for complete mass balance through a transversely running eccentric shaft and an adjustable lever system. · BRUDERER belt feeder device attached ...

2007 Amada EMZ 3610 NT + Tapping + PDC II + ASL 300 + PR UL 3

• Manufacturer: Amada
• Model: EMZ-3610NT

Amada EMZ 3610 NT + Tapping + PDC II + ASL 300 + PR UL III Year: 2007 Machine hours: about 137.500 h Technical data: Control: AMNC-F Punching force: 300kN Working area X/Y: 2500 x 1525 mm With repositionin...

1989 MUBEA KLH 500/610

• Manufacturer: Mubea
• Model: KLH 500610
• Throat depth: 610 mm
• Power requirement: 7.5 kW

Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Pressure: 50t | Throat: 610mm | Total power requirement: 7,5kW | Machine weight.: 1700kg | Dimensions: 1500 ...

2006 MUBEA HP 1000/760

• Manufacturer: Mubea
• Model: HP 1000760
• Throat depth: 760 mm
• Power requirement: 8.5 kW

Accessories / equipment: - punching table Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg. | Pressing force: 100t | Diameter: 40mm | Throat: 760mm | Total powe...

2008 Amada EMK 3510 NT + L III + PR III UL

• Manufacturer: Amada
• Model: EMK-3510NT

Amada EMK 3510 NT with L III and PR III UL Year of construction: 2008 Machine hours: 116,000 h Amada EMK 3510 NT Control: AMNC-F Punching force: 300kN Travel range X/Y: 2500 x 1270 mm (with repositioning: 5...