Used Saws in Germany

2009 Danobat CP 11.11
- Manufacturer: Danobat
- Model: CP
Used Danobat CP 11.11 band saw Few hours in good condition, fully functional.
Erkelenz, Germany
Trusted Seller
MEP SHARK 331-1 NC SPIDER 5.0
- Manufacturer: MEP
- Model: Shark 331
- Power requirement: 2.2 kW
Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows "CE" based MEP-50 controller and 7 "touch-screen display f...
Günzburg, Germany
Trusted Seller
2000 KALTENBACH KBS 851 DGNC
- Manufacturer: Kaltenbach
- Model: KBS
This sawing machine was manufactured in 2000 by KALTENBACH. The KBS 851 DGNC features a miter tilting capability of -60° left and -50° right, accommodating material dimensions at 90° up to 850 x 500 mm. It suppor...
Germany
Trusted Seller
MEP Cobra 352 SX EVO
- Manufacturer: MEP
- Model: Cobra 352
Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Dimensions of saw blade: 350 x 32 x 3,4mm | Capacity 90 degrees round: 120mm | Capacity 90 degrees square: 105mm | Capacity 90 d...
Günzburg, Germany
Trusted Seller
ZIMMER Z 185-1/R
- Manufacturer: Zimmer
- Model: Z185
- Power requirement: 2.35 kW
Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball b...
Günzburg, Germany
Trusted Seller
1989 EISELE VMS-III-S
- Manufacturer: Eisele
- Model: VMS-III
Saw blade diameter: 350 mm here cutting area at 90 and 45° round: 120 mm at 90° flat: 170 x 100 mm at 45° flat: 120 x 100 mm at 90° square: 100 mm at 45° square: 95 mm 2 saw blade speeds: 17/34 /min Drive...
Wiesbaden, Germany
Trusted Seller
2002 L&V Mechanical engineering PSM1/200 103424
- Manufacturer: L&V
Control: hand | Equipping the machine: 2 X 2.2 Kw swivel saw motors | Workpiece height min- max mm: 10-80 | Milling units piece: 2 | Speed rpm: 5800 | Kw power motor: 2,2 | Manual feed: Chain feed
Petershagen, Germany
Trusted Seller
1980 KALTENBACH KKS 400
- Manufacturer: Kaltenbach
- Model: KKS-400
Saw blade diameter: 400 mm here cutting area at 90° round: 120 mm rectangle: 200 x 80 or 150 x 70 mm mit mit 45° mitered right angle: rectangular/flat: 150 x 70 mm upright: 100 x 60 mm 2 cutting speeds by po...
Wiesbaden, Germany
Trusted Seller
2020 MEP COBRA 352 MA
- Manufacturer: MEP
- Model: Cobra 352
Control: Other - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Dimensions of saw blade: 350x32x4mm | Vice: 180mm | Capacity 90 degrees round: 120mm | Capacity 90 degrees square: ...
Günzburg, Germany
Trusted Seller
ZIMMER Z252/DG
- Manufacturer: Zimmer
Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Capacity 90 degrees round: 240mm | Capacity 90 degrees square: 240 x 240mm | Capacity 90 degrees flat: 165 x 210mm | Capacity 60...
Günzburg, Germany
Trusted Seller
1992 JAESPA MSU 4 1113-6346
- Manufacturer: Jaespa
- Model: MSU 4
- Power requirement: 2 kW
Table swivels and tilts Control type: conventional | Freight basis: FCA | Roll diameter: 420 mm | Discharge: 400 mm | Workpiece height: 325 mm | Table surface: 615 x 615 mm | Table swiveling +/-: 10/45 ° | Table ...
Staufenberg, Germany
Trusted Seller
ZIMMER Z 241-1/R
- Manufacturer: Zimmer
- Model: Z241
- Power requirement: 1.2 kW
Zimmer Z241 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After cutting, the machine stops by a safety limit switch. The lowering is infinitely adjustable via a hydraulic system. Lifting the saw...
Günzburg, Germany
Trusted Seller
2025 Robland Z 400 X-1
- Manufacturer: Robland
- Model: Z 400 X-1
CE marking, 3 axes electrically adjustable Sled length: 3200 mm | Cutting width at the rip fence: 1250 mm | Cutting width at the crosscut fence: 3200 mm | Cutting depth: 125 mm | Scoring: Yes | Height adjustment ...
Egenhofen, Germany
Trusted Seller
ZIMMER Z252/DGH
- Manufacturer: Zimmer
Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Capacity 90 degrees round: 240mm | Capacity 90 degrees square: 240 x 240mm | Capacity 90 degrees flat: 165 x 210mm | Capacity 60...
Günzburg, Germany
Trusted Seller
2022 MEP SHARK 331-1 NC SPIDER 5.0
- Manufacturer: MEP
- Model: Shark 331
- Power requirement: 2.2 kW
Control: NC - | Storage location: Günzburg | Freight basis: Delivery ex location. | Dimensions of saw-band: 3650x27x0,9mm | Speed: 15/100m/min | Capacity 90 degrees round: 280mm | Capacity 90 degrees square: 260...
Günzburg, Germany
Kaltenbach SKL Saw
- Manufacturer: Kaltenbach
- Model: SKL
Good condition Kaltenbach SKL Saws available between 1965 and 2001 years. Located in Germany and other countries. Click request price for more information.
Germany