Used Processing in Canada

Alfa Laval Plate Heat Exchanger with a Grundfos Pump

• Manufacturer: Alfa-Laval

-Plate heat exchanger: Model: M6-MFM -1.0/1.3 MPA @ 145 DEGC Capacity -Serial number: 3011-83-225 -Grundfos Pump: -Model: A96559794P10833 -Serial number: 0001 -HP: 3 -1850 GPH -Head: 280 ft -Total dimensions: -He...

11,383 Liter Double walled plastic tank

-Double walled -Flat bottom -Plastic -Closed top -2,504 IMP

7,169 Litres steel tank

-Tank dimensions: 145" tall x 62" -Cone bottom with a 3" drain -Top with lid -On steel legs -1,500 imperial gallon tank -Shipping dims: 180" long/tall x 70" wide approximately 2000 pounds

Particulate filtration Circulation system

• Manufacturer: Filmax

-230/460 Volts 3 PH , 2/1 Amps -.5HP -1725 RPM -Dimensions: 48" Length x 40" Width x 36" Height -Circulation pump through filter unit, was used for fine oil

Hoffman Pulse-Aire Dust Collector

• Manufacturer: Hoffmann

-Shipping dimensions: H- 17’2” x W-94” x L-72” -The barrel measurement is 100” from top to the cone -The bottom opening has a 9.5" diameter

Accumulators

• Manufacturer: Bosch - Rexroth

-Shipping Dimensions: length 55" x width 30" x height 13" -Blue hydraulic Accumulators -DWG. N0: 47-AS-278819-E -Circuit No: HS47-A1-278819-E -Approx Weight: 2225 Kg -Fluid: Mineral Oil VG46 -Part No: 279500 -MD:...

970 Litres fibreglass tank with manhole on top

-3 stationary legs -Dome bottom -Flat lid with manhole -215 imp

Clamp Down Bag Filter

-Shipping dimensions: length 42" x width 15" x height 13" -Inlet / outlet - 2.5"

Twister T4 Trimmer

• Manufacturer: Twister

-Dimensions: 25" length x 15" width x 16.5" height -115 V -2A current draw -Blade motor: 200W/0.25 HP -Tumbler Motor: 6w/1/125 HP -5 inch discharge -speed control

Twister T2 Trimmer

• Manufacturer: Twister

Sterling motor -1 Hp -115/208-230 V -1 Phase -60 Hz -15.4/7.5-7.7 amp

2,200 Litres plastic storage tank with SS containment

-4' dia x 7' high plastic tank -5' x 6 1/2' x 32" deep SS containment tank -C/w Prominent metering pump -LAST USE: ACID STORAGE/WATER TREATMENT -3 IN STOCK

Filter Regulator

• Manufacturer: SMC

-Shipping dimensions: 3" L x 3" W x 10" H -Set press 7~100psi -Max press 150 psi -Max temp 140 F

7,169 Litres steel tank

-Tank dimensions: 145" tall x 62" -Cone bottom with a 3" drain -Top with lid -On steel legs

68 Litres standing tank

-Stationary -Flat bottom -With half closing lid -Legs are 30" -51" tall -Stainless steel

Scott Equipment co. hammer mill SH18-12

• Manufacturer: Scott

-Model: SH18-12 -Baldor motor: 5HP, 1725 RPM, 208-230/460 Volts -Shipping dimensions: fits on a skid, sits 21" tall -Inlet is 27" x 20"

Park Industries Yukon Bridge Saw

• Manufacturer: Park Industries
• Model: Yukon

Good condition Park Industries Yukon Bridge Saws available between 2000 and 2018 years. Located in USA and other countries. Click request price for more information.