Used Machine Tools in Saxony, Germany

COVER Trapezoidal threaded spindle

• Manufacturer: Pagus

Trapezoidal threaded spindle COVER Thread: Ø 24 mm spare part for milling machine DECKEL KF12 ! used, tested !

BO322

Column drill press ZMM METALLIK PAZARDJIK MK20 Vise: Motor: ELPROM A0100L8/4 0.7 / 1.1 kW 720 / 1430 rpm 380 V 3AC 2.5 / 3.2 A Used, tested!

RSF ELECTRONIC length measuring system

length measuring system RSF ELECTRONICS MSA6706 83577408 approx. 0.6 m connecting cable Spare part, etc. for Machining Center MAZAK AJV25 /405 ! Used!

HEIDENHAIN length measuring system

length measuring system HEIDENHAIN LS486C ID 329 991-22 approx. 1.5 m connection cable Spare part, etc. for Machining Center HECKERT CWK400 D! Used, checked !

PAULSTRA all-metal damper

• Manufacturer: PAULSTRA

All-metal damper, machine foot, leveling footset, vibration isolator PAULSTRA V1H752-11 Material (all-metal cushioning pad) CrNi steel wire All-metal damper set consists of 4 feet! Used!

SPITZNAS pneumatic impact wrench

• Manufacturer: SPITZNAS

Pneumatic impact wrenches, pneumatic wrenches SPITZNAS 1 inch with claw coupling used, checked, illustration may differ!

HELLER chip conveyor

• Manufacturer: Heller

Chip conveyor HELLER type BEA 05 Drive motor: 0,3 kW 9.0 rpm 220 / 380 V 3AC, 50 Hz Coolant pump1: Q: 250 l/min, H: 13 m 1.7 kW 2850 rpm 230 / 400 V 3AC 50 Hz Coolant pump2: Q: 100 l/min, H: 2 m 0.24 kW 2750 rpm ...

AIRLOC leveling shoe

• Manufacturer: Pagus

Levelling shoe, machine foot, wedge foot, free-standing, 2 pieces AIRLOC 2-VRC New !

FARRAT leveling shoe

• Manufacturer: FARRAT MACHINERY Ltd.

Levelling shoe, machine foot, wedge foot, free-standing, 4 pieces FARRAT MACHINERY Ltd used, tested !

FARRAT leveling shoe

• Manufacturer: FARRAT MACHINERY Ltd.

Levelling shoe, machine foot, wedge foot, free-standing, 4 pieces FARRAT MACHINERY Ltd Other quantities on request! used, tested !

COVER tensioning drive

• Manufacturer: Pagus

Clamping drive, electric with manual fine adjustment COVER 194 rpm i = 7 (electric) i = 1 (manual) Motor: AEG AD 71 NZ 4 0.37 kW 1360 rpm 220 / 380 V AC spare part for milling machine DECKEL KF12 ! used, tested !

WMW tensioning drive

• Manufacturer: WMW

Clamping drive, clamping force generator electric WMW EDU I80 M TGL 0-5471 Torque adjustable in 8 steps from 20 to 120 Nm 80rpm 220/380V unused! Customers who bought this product also bought the following product...

BARRY air spring

• Manufacturer: BARRY CONTROLS GmbH

Air spring, machine base BARRY CONTROLS GmbH SLM-48 Internal thread: M14 x 2.0, depth: 20 mm used, checked!

WMW service unit

• Manufacturer: WMW

Service device, machine control WMW SERVICE DEVICE III AUERBACH Fkr SRS 250/1 (AUERBACHFkrSRS250 /1) approx. 6 m connecting cable Similar to illustration! Used!

PAGUS mechanical clutch

• Manufacturer: Pagus

mechanical clutch PAGUS Hollow shaft 1: Diameter: Ø 24 mm 1 groove Hollow shaft 2: Diameter: Ø 21/25 mm 4 grooves Spare part and others. for milling machine FRITZ WERNER FV1! Used!