Used Machine Tools in Saxony, Germany

WMW SP 5040x2230x460

• Manufacturer: WMW

Machine table can be used as clamping plate. - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55....

BILZ leveling shoe

Leveling shoe, machine base, wedge base, free-standing, 4 pieces BILZ PK 4/1 used, tested!

BILZ leveling shoe

Levelling shoe, machine foot, wedge foot, free-standing, 2 pieces BILZ 4-VRC New !

COVER tensioning drive

• Manufacturer: Pagus

Clamping drive, manual with fine adjustment DECKEL spare part for milling machine DECKEL KF12 ! used, tested !

bolster plate AP 2500x1250x100 (Nr.1-2)

Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 th...

COVER Trapezoidal threaded spindle

• Manufacturer: Pagus

Trapezoidal threaded spindle COVER Thread: Ø 24 mm spare part for milling machine DECKEL KF12 ! used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 250 x 3 ( DH250x3 ) TGL 30-2333 used, tested!

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chucks, three-jaw chucks, power chucks, wedge hook chucks WMW ( DKRDA250x3 ) Jaws individually adjustable by toothing ! with accessories ! used, tested !

RSF ELECTRONIC length measuring system

length measuring system RSF ELECTRONICS MSA6706 83577408 approx. 0.6 m connecting cable Spare part, etc. for Machining Center MAZAK AJV25 /405 ! Used!

BO322

Column drill press ZMM METALLIK PAZARDJIK MK20 Vise: Motor: ELPROM A0100L8/4 0.7 / 1.1 kW 720 / 1430 rpm 380 V 3AC 2.5 / 3.2 A Used, tested!

HEIDENHAIN length measuring system

length measuring system HEIDENHAIN LS486C ID 329 991-22 approx. 1.5 m connection cable Spare part, etc. for Machining Center HECKERT CWK400 D! Used, checked !

RÖHM 2-jaw chuck

• Manufacturer: Röhm

2-jaw chuck, two-jaw chuck, power chuck, wedge-hook chuck ROHM KFD-160/2 Individually adjustable jaws through teething ! Used!

PAULSTRA all-metal damper

• Manufacturer: PAULSTRA

All-metal damper, machine foot, leveling footset, vibration isolator PAULSTRA V1H752-11 Material (all-metal cushioning pad) CrNi steel wire All-metal damper set consists of 4 feet! Used!

ALLMATIC basic B 160

• Manufacturer: ALLMATIC

Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Jaw width: 160 mm | Weight of the machine approx.: 13,5 kg | Space requirements of the machine approx.: m | Spa...

HOFFMAN LK 630 - G 17

• Manufacturer: Hoffmann

Face Chuck - 3-Jaw chuck Type of control: conventional | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Diameter: 630 mm | Weight of the machine approx.: ca. 275 kg | Transport dimensi...