Used Machine Tools in Saxony, Germany

IND-SPHINX® micro drill

• Manufacturer: Pagus

Micro drills, drills, 18 pieces IND-SPHINX® PRECISION LIMITED D8353 D8353030501050000 Ã3.05x10.50mm New!

ND-SPHINX® micro drill

• Manufacturer: ND-SPHINX

Micro drills, drills, 49 pieces IND-SPHINX® PRECISION LIMITED D8352 D8352006000700000 New!

PAGUS mechanical clutch

• Manufacturer: Pagus

mechanical clutch PAGUS Hollow shaft 1: Diameter: Ø 24 mm 1 groove Hollow shaft 2: Diameter: Ø 21/25 mm 4 grooves Spare part and others. for milling machine FRITZ WERNER FV1! Used!

WMW drill

• Manufacturer: WMW

Twist Drill WMW Ø 69 mm x 425 mm HSS Used! Total length: 425 mm | Spiral length: 230 mm | Morse taper: MK5 | Dimensions: 430 x 70 x 70 mm

WMW AW 1020x810

• Manufacturer: WMW

Drill cube material made of cast steel. Surface with strong drill inclusions. T-slots according to DIN 650 - Vertical clamping surface: LxD: 1020 x 625mm - Horizontal clamping surface: LxW: 1020 x 810mm

WMW AW1000x800x640

• Manufacturer: WMW

clamping surface is roughly machined good used condition, slight traces of use T-slots according to DIN 650: a=28mm; b=49mm; c=21mm; h=50mm distance T-slot : T-slot= 160mm

IND-SPHINX® micro drill

• Manufacturer: Pagus

Micro drills, drills, 45 pieces IND-SPHINX® PRECISION LIMITED D5463 D5463008000850000 Ã0.80x8.50mm Other quantities on request! New!

J+P pneumatic punch

Pneumatic punch press J+P, JAGOW + PFEIFER GmbH STZ-KO Used, tested!

VAN MARK cooling slot punch

Cooling slit punch, Slit punch, Hand lever punch VAN MARK PRODUCTS CORPORATION TRIM-A-LOUVER used, tested !

ATLAS COPCO angle drilling machine

• Manufacturer: Atlas-Copco

Angle drilling machine ATLAS COPCO LBV16 045-91 8421 0110 38 used, checked ! with operating instructions !

ATLAS COPCO angle drilling machine

• Manufacturer: Atlas-Copco

Angle drilling machine ATLAS COPCO LBV16 045-91 8421 0110 38 used, tested ! with operating instructions !

WMW AW 330x310

• Manufacturer: WMW

Application: Machine table adjustable clamping angle with 3 T-slots according to DIN 650: a=17; H027; b=32; c=14mm distance 100mm swivelling via tooth guide +90° rotatable 360° Base Ø 350mm with 2x clamping groov...

FIXATOR leveling range

• Manufacturer: Pagus

Bench leveling range for machine feet e FIXATOR 7 pieces Ø 100 mm x 1 mm, with slot 24 mm 8 pieces Ø 100 mm x 2 mm, with 24 mm slot 1 piece Ø 100 mm x 4 mm, with 24 mm slot 1 piece Ø 100 mm x 5 mm, with 24 mm slo...

TARGET PRECISION micro drill

• Manufacturer: TARGET PRECISION

Micro drill, head drill, drill, 18 pieces TARGET PRECISION Series 150 Other quantities on request! New!

TARGET PRECISION micro drill

• Manufacturer: TARGET PRECISION

Micro drill, head drill, drill, 36 pieces TARGET PRECISION Series 150 Other quantities on request! New!