Used Machine Tools in Saxony, Germany

WMW AW 1020x810

• Manufacturer: WMW

Drill cube material made of cast steel. Surface with strong drill inclusions. T-slots according to DIN 650 - Vertical clamping surface: LxD: 1020 x 625mm - Horizontal clamping surface: LxW: 1020 x 810mm

GESAU drill

• Manufacturer: Pagus

Stepped drill with internal cooling GETTING (Ø14,5x23,5 /120 ° x25x110) with internal cooling! unused!

WMW drill

• Manufacturer: WMW

Twist Drill WMW Ø 69 mm x 425 mm HSS Used! Total length: 425 mm | Spiral length: 230 mm | Morse taper: MK5 | Dimensions: 430 x 70 x 70 mm

PAGUS drill

• Manufacturer: Pagus

Twist drill RECA HSS Twist drills 29.75 - 50 mm MK Shank 29.75 /32/35/37/38/39 /39.75 /42/44/44/46/50mm 14 pieces Used!

FEIN tin snips

• Manufacturer: Fein

Sheet metal shears, high-frequency sheet metal shears, high-frequency tool, high-frequency machines FEIN QSz 848 0.5 kW 1240 strokes/min 265 V 3AC 200 Hz approx. 3.5 m connection cable used, tested!

WMW SP 5040x2230x460

• Manufacturer: WMW

Machine table can be used as clamping plate. - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55....

IND-SPHINX® micro drill

• Manufacturer: Pagus

Micro drills, drills, 45 pieces IND-SPHINX® PRECISION LIMITED D5463 D5463008000850000 Ã0.80x8.50mm Other quantities on request! New!

bolster plate AP 2500x1250x100 (Nr.1-2)

Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 th...

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 250 x 3 ( DH250x3 ) TGL 30-2333 used, tested!

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chucks, three-jaw chucks, power chucks, wedge hook chucks WMW ( DKRDA250x3 ) Jaws individually adjustable by toothing ! with accessories ! used, tested !

IND-SPHINX® micro drill

• Manufacturer: Pagus

Micro drills, drills, 28 pieces IND-SPHINX® PRECISION LIMITED Type 546 54600005000550000 Ã0.50x5.50mm Other quantities on request! New!

IND-SPHINX® micro drill

• Manufacturer: Pagus

Micro drills, drills, 18 pieces IND-SPHINX® PRECISION LIMITED D8353 D8353030501050000 Ã3.05x10.50mm New!

ND-SPHINX® micro drill

• Manufacturer: ND-SPHINX

Micro drills, drills, 49 pieces IND-SPHINX® PRECISION LIMITED D8352 D8352006000700000 New!

RÖHM 2-jaw chuck

• Manufacturer: Röhm

2-jaw chuck, two-jaw chuck, power chuck, wedge-hook chuck ROHM KFD-160/2 Individually adjustable jaws through teething ! Used!

Tool milling machine TOS FN 20

• Manufacturer: TOS

Table size [mm]: 600 x 240 Tool holder: SK 40 Speed range [1/min]: 50 - 2500 Travel [X / Y / Z mm]: 300 / 200 / 350 Equipment / accessories: Vertical head with quill, counter bearing