Used Materials Testing in Germany

Illumination device, Allen-Vanguard VIP 5

• Manufacturer: Allen

Product information "Illuminator, Allen-Vanguard VIP 5" Illuminators, manufactured by Allen-Vanguard - Small illuminator 3.0 and 14.0 mm series - Illuminator ( 3mm/ length 75 mm) & SP - 14 mm clip for mirror syst...

Illumination device, Allen-Vanguard VIP 3

• Manufacturer: Allen

Product information "Illuminator, Allen-Vanguard VIP 3" Illuminator, Allen-Vanguard VIP 3 - Small illuminator LP 3/75 (3.0 mm x 75 mm), - mirror clamp ( 3 mm/ length 75 mm), - 1 x spare lamp 3 W - Case with foam ...

Slip cross magnet 42 volts

Product information "Helling cross magnet 42 Volt" Helling cross magnet on rollers completely overhauled // - newly potted - ideal testing device for simultaneous longitudinal and transverse fault testing! requir...

JANKE & KUNKEL IKAMAG RH

• Manufacturer: Janke & Kunkel

Heating plate, adjustable temperature and stirring frequency, 415 W, 230 V, 50 Hz, 20 - 2,000 rpm.

Drying apparatus (loss on ignition)

• Manufacturer: KLEES

Radiant heater, 220 V, 50 Hz, 900 W, porcelain glow bowl (mortar) with pestle

+GF+ - GEORG FISCHER SPIT

• Manufacturer: Georg Fischer

Connected loads 220 V, 50/60 Hz, 250 W, timer 15 min.

+GF+ - GEORG FISCHER SPT

• Manufacturer: Georg Fischer

Electric motor type PMR 70/30 K, 20 W, 8,500 rpm, 220 V, 50 Hz, 0.25 A

Spectroline BIB 150 P / F

• Manufacturer: SpectroLine

Product information "Spectroline BIB 150 P/F" Spectroline BIB 150 P/F UV hand lamp ( build in ballast ) without ballast with belt switch ( clip ), 230 Volt / 50 Hz, weight: 1.8 kg

Herb herb Dyna Mic

Product information "Krautkrämer Dyna Mic" Krautkrämer Dyna Mic and cable in the case - used -

HARTIP 1900

Product information "HARTIP 1900" Hardness tester Hartip 1900 ( rebound hardness method ) Operating instructions .

Labino UV A meter

Product information "Labino UV A Meter" Labino UV A Meter Hagner Digital Radiometer EC1 UV-A

+GF+ - GEORG FISCHER PFH / GM-246

• Manufacturer: Georg Fischer

for direct reading of the surface hardness of compacted green sand molds

JANKE & KUNKEL MINI-MR

• Manufacturer: Janke & Kunkel

Adjustable stirring frequency, 0 - 2,000 rpm, 1.5 W, 220 V, 50 Hz

RETSCH EM 2200 T

• Manufacturer: Retsch

Hotplate, adjustable temperature and stirring frequency, 230 V, 1850 rpm, 630 W

+GF+ - GEORG FISCHER SPDU

• Manufacturer: Georg Fischer
• Model: SPDU

for determining the gas permeability, measuring ranges 0 to 50 or 0 to 500 Gd