Used Processing in Hamburg, Germany

2021 Burkhardt Löffler 2000 K
- Manufacturer: Löffler
CNC bridge saw with vacuum separation, monoblock Mobile support tables with crane loops for attaching the cable for bridge saws The approximate offer price is not binding (valid); the final price will be communic...
Hamburg, Germany
2006 PELLEGRINI DF 2000 top-
- Manufacturer: Pellegrini
- Model: DF2000
Wire saw overhauled (pictures not yet overhauled) The overhaul includes: Sandblasting Painting Replacement of bearings, nuts, seals, pipes (and everything that goes with it) Overhauled trolley Repair of hubcaps T...
Hamburg, Germany
2020 MEC IMP AUT PX+P4+PX
- Manufacturer: MEC
Complete, fully automatic stone splitting system MEC IMP AUT consisting of 3 stone splitting machines and a waste conveyor PX + P4 + PX PX 1900 x 500 P4 950 x 400 Max. 1800 x 550 mm More used machines at: www.jan...
Hamburg, Germany
2020 Matec 10-
- Manufacturer: Matec
Complete water treatment system with 10 filter plates Was not used after installation, in mint condition Filter plate size 800 x 800 mm Siemens control system Thickener Various pumps Dimensions +/- 3000 x 1650 mm...
Hamburg, Germany
2003 BAVELLONI Egar 315-4 Ts-
- Manufacturer: Bavelloni
- Model: Egar
CNC machining center Interpolated axis 4 KW 9.6 X-axis mm. 2,730 Y-axis mm. 1,620 Software Cad Cam Easycad Steep taper ISO 40 Tool magazine positions 19 Voltage V.400 Hz 50 More used machines at: www.janssen-used...
Hamburg, Germany
2017 INTERMAC Master 45-
- Manufacturer: Intermac
- Model: Master 45
5-Axis CNC Machining Center Operating Hours: 3,568 Maximum Dimensions: 4,060 x 2,300 mm PC-controlled 5-axis machining center for milling, drilling, grinding, polishing, beveling, and engraving marble, stone, and...
Hamburg, Germany
2002 Comandulli EDILUX 8+4 DX-
- Manufacturer: Comandulli
- Model: Edilux
Edge polishing machine for marble and granite straight edge working direction from right to left 8 heads, 4 bevels plate thickness min. 20 mm, max. 100 mm total power – kW 26.7 total weight of the machine: 4,200 ...
Hamburg, Germany
2005 Dr. Kronenberger -
- Manufacturer: Dr. Kronenberger
Complete water treatment including all pumps Pre-clarification tank Septic tank 1 new sludge container of approx. 5m³, the fine metal grid in the container works like a coffee filter, the water runs out the botto...
Hamburg, Germany
2015 Intermac Master 850
- Manufacturer: Intermac
CNC machining center/CNC bridge saw 60-tool magazine Saw blade included Bsolid CAD/CAM software Machine equipped with deposition tools, drain, and drums for straight edges Vacuum cleaner included More used machin...
Hamburg, Germany
1998 SIMEC LM2000/212
- Manufacturer: Simec
- Model: LM 2000
Marble polishing line Slabs with 10 polishing heads per slab + 2 calibration units (80 cm) Slab loading carriage Intermediate roller conveyors Tilt-type slab unloading roller conveyor More used machines at: www.j...
Hamburg, Germany
2009 MEC P 4 600x300 + 800x300
- Manufacturer: MEC
Stone splitting system 1. Stone splitting machine P4 600x300 built in 2009 T 42 2. Stone splitting machine P4 800x300 built in 2011 T 60 Pressure: Bar 315 More used machines at: www.janssen-usedmachines.com New s...
Hamburg, Germany
1995 Levi Tunisi LT 1204-
- Manufacturer: Levi Tunisi
- Model: LT
Block cutter for marble complete with unloading and cross cutter (crosscut saw) Saw blade 1,550 mm Motor 150 hp Complete with trolley, unloading and crosscut saw Voltage V. 380 Hz 50 More used machines at: www.ja...
Hamburg, Germany
2003 Bavelloni Egar 250-4
- Manufacturer: Bavelloni
- Model: Egar 250
CNC Machining Center The machine has only 2,300 operating hours! X-axis 2,730 mm Y-axis 1,620 mm Z-axis 300 mm Tool positions: 19 Table size: 2,500 x 1,200 mm The machine comes complete with all the tools shown i...
Hamburg, Germany
2005 Omag Mill 4X-
- Manufacturer: Omag
- Model: Mill 4X
CNC machining center with 4 axes 25-position tool magazine Collet replaced with original Saccardo parts. Touchscreen and computer are brand new Approximately 20 steep taper chucks are also included with the machi...
Hamburg, Germany
2010 Prussiani Champion 60-
- Manufacturer: Prussiani
- Model: Champion
CNC 5-axis monoblock bridge saw with vacuum lifting system Vacuum lifter for automatic loading Tilt table X-axis 3,500 mm Y-axis 2,200 mm Z-axis 300 mm 5-axis head from 0° to 90° CAD/CAM software Wcam2k More used...
Hamburg, Germany