Used Processing in Netherlands

Drum motor (2x)

1x Ø 320 mm, roll width 1150 mm, 1x Ø 310 mm, roll width 1750 mm, on 2 pallets

Various racks and racks

Including 3x stainless steel rack, size 870x680x1800 mm, 2x plastic cold store rack, 4x cutting table, 2x gas bottle holder, 3x mobile sink, bottle cleaner and 2 bag holders

Weighpack - 2022 - JuanaRoll - Automatic cone filling, weighing and sealing machine - Joint Filler

• Manufacturer: Weighpack

- Automatic cone processing machine for opening, filling, weighing, compressing and twisting of cones - Equipped with servo-controlled conveyor with cone blocks for station-to-station processing - Vision System p...

(c) 2017 Visscher Twin separator installation

motor power: 22KW, equipped with REKO sieve bend, type: 1200-LB/0071/X (2013), including buffer tank, 2 RX pneumatic butterfly valves, cage ladder and steel frame construction. This lot is part of the final combi...

(c) Central control cabinet

for washer 1 and 2, separator and circulating pump, equipped with Siemens Simatic HMI operator panel. This lot is part of the final combination 31 (1 t/m 30)

2015 Watt drive mixer

0.75 kW electric motor with gearbox and 1200 mm long arm

(c) Flush coil installation

Consisting of 2 stainless steel tanks size approximately ø 1800 x h4400 mm, each with 1 Vischer slurry press, 2 mixers, 1 bottom valve, 2 OBPI cavity pumps, type: BPI 80DNL1, capacity: 39 m3/h, motor power: 5.5 K...

(c) Feed auger cutting machine

motor power: 11 KW, 400 volts, equipped with emergency stop protection, Lincoln central lubricator, 1 stainless steel motor-driven feed conveyor, dimensions: L4000 x W1600mm, including galvanized walkway. This lo...

(c) 2014 Toro FRC-20 Dissolved Air Flotation Unit

• Manufacturer: Toro

equipped with stainless steel chassis, walking platform, 1 vertical steel pressure tank, 2 transport pumps, 3 dosing pumps, 1 Endress + Hauser flow meter, valves and piping under the flotation unit. including 1 s...

(c) 2015 Defender TR-40/75 Rotary Strainer

power: 0.25 KW, on steel base. This lot is part of the final combination 31 (1 t/m 30)

1998 Martin T44

• Manufacturer: Martin
• Model: T44

Martin T44 Thicknesser Engine: 5.5 KW - 400 V | Rpm: 5.000 tpm | Cutterhead: Z-4 Tersa | Cutterhead od: ø125 mm | Working width: 630 mm | Working thickness: 2.8 - 300 mm | Scheduling dept: max. 12 mm | Table leng...

Trousers reel

Maximum 200 bar, 90°

Trousers reel

Maximum 200 bar, 90°

Trousers reel

Maximum 200 bar, 90°

(c) 2019 Visscher Cutting filter L3000 Mill macerator

with SDN cavity pump, type: DN-B-641, motor power! 5.5 KW, on chassis. including pneumatic valve and flexible hose up to the extractor. This lot is part of the final combination 31 (1 t/m 30)