Used Processing in Wallonia, Belgium

Vibrating conveyor 1840 mm x 235 mm

2 Vibrating motors 380 V, 0,4 A Outside dimensions: 1970 mm  x 750 mm, h. 500 mm | Useful dimensions: 1840 mm  x 235 mm, h. 140 mm | Weight: 500 kg

Extraction belt 1750 x 585mm

Gearmotor LEROY SOMER, 3 hp, 1430 rpm, 8,6/4,95 A, 220/380 V Rollers Ø 89mm, length 690mm Width of rubber 585mm, axle distance 1750mm Width of rubber Ø 210mm, band speed 0,45m/s

Rubberbelt conveyor ± 100 mm x 1000 mm

• Manufacturer: Gourdon

1 roll, 3 plis, thickness 9 mm, max. 180 °C Dimensions: ± 100 m x 1000 mm | Quality: new

Ladle suspension system IAS 2,5t

• Manufacturer: IAS

External dimensions: Length: 2100 mm; Height: 2200 mm

Pneumatic sand feeder HENSEL 100l

• Manufacturer: HENSEL

Dimensions: Length: 1160 mm; Width: 800 mm; Height: 1320 mm Max. temperature = 200 °C

Ladle suspension system FOUNDRY SERVICE

• Manufacturer: FOUNDRY SERVICE

External dimensions: Length: 2100 mm; Height: 2200 mm

Pouring Furnace PROGELTA GH3, 200 kW

• Manufacturer: PROGELTA

Hydraulically tiltable With channel inducteur, 200 KW, 400 V, 50 Hz With spare furnace body With spare inductor With emergency power generator New electric control in 2022 with PLC SIEMENS TIA Portal

Core sand mixing installation STEFFENS ±2t/h

• Manufacturer: STEFFENS

System consisting of mixer, hopper, transfer trolley and dosing station for resin and hardener Mixer: External dimensions: Length: 700 mm; Width: 900 mm; Height: 1500 mm Usable dimensions: Ø600 mm; Depth: 460 mm ...

Gasing unit LÜBER LW-FDA-825; 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With 8 kW heating With contactor control and stainless steel storage tank 30 l Compressed air control via proportional valve With micro pump, gas dosing via rotameter

Gasing unit LÜBER LW-FDA-825; 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With 8 kW heating With contactor control and stainless steel storage tank 30 l Compressed air control via proportional valve With micro pump, gas dosing via rotameter

Compressor ATLAS COPCO GA75FF 763m³/h

• Manufacturer: Atlas-Copco
• Model: GA 75

External dimensions: Length: 2000 mm; Width: 1000 mm; Height: 1950 mm

Induction furnace JUNKER 2x 4t

• Manufacturer: Junker

Crucible dimensions: Ø780mm; height: 1475mm Melting and holding warm possible at the same time With 2 loading conveyors With 2 water pump stations With hydraulic unit With control cabinet SIEMENS S5 control With ...

1980 Dry Discgrinder HERZOG HT 350-2

• Manufacturer: Herzog

Type: HT350-2, Year: 1980, in very good conditions With installed dust filter

1989 Vibrating dryer TECHNOFINISH

• Manufacturer: TECHNOFINISH

Make: TECHNOFINISH | Weight: ± 1000 kg | Dimensions: Ø 1560mm, height 1300mm | Motor: 380 V, 50 Hz | Useful width: max. 450mm

8 Ingots moulds 2 x ±4l

Dimensions: Length: 1100 mm, width: 300 mm; height: 230 mm Internal dimensions bottom: 150 x 110 mm; top: 220 x 370 mm with round trunions, 1 side with square pin in suplement for tilting Without support construc...