2024 TAKEUCHI TW95 in Denver, CO, USA
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Operating weight
- 18,188 lb (8,250 kg)
- Tipping load: straight
- 14,307 lb (6,490 kg)
- Tipping load: full turn
- 12,652 lb (5,739 kg)
- Operating capacity: sae j818*
- 6,326 lb (2,870 kg)
- Bucket breakout force
- 15,873 lb (7,200 kg)
- Lift arm breakout force
- 18,077 lb (8,200 kg)
- Traction force
- 13,592 lb (6,165 kg)
- Travel speed - low range
- 4.0 mph (6.5 km/hr)
- Travel speed - high range
- 12.4 mph (20.0 km/hr)
- Optional high speed travel
- 24.9 mph (40.0 km/hr)
- Note
- *Rate Operating Capacity (ROC) for wheel loaders is rated with a bucket according to SAE J818 at no more than 50% of the full turn tipping load.
- Auxiliary flow - primary circuit
- 26.4 gpm (100.0 Lpm)
- Auxiliary flow- optional circuit
- 26.0 gpm (98.0 Lpm)
- Hydraulic system pressure
- 3,336 psi (23.0 MPa)
- Make/model
- Deutz / TD 3.6 L4
- Engine displacement
- 176.0 cu in (3.6 L)
- Horsepower @ 2,800 rpm
- 114.0 hp (85.0 kW)
- Maximum torque @ 1,600 rpm
- 339.9 ft-lb (460.0 Nm)
- Engine lubrication
- 9.5 qt (8.0 L)
- Cooling system
- 22.2 qt (21.0 L)
- Fuel tank capacity
- 31.7 gal (120.0 L)
- Fuel consumption (65% of full load)
- 6.5 gal/hr (24.6 L/hr)
- Hydraulic reservoir capacity
- 28.0 gal (106.0 L)
- Front axle lubrication
- 7.6 qt (7.2 L)
- Rear axle lubrication
- 7.6 qt (7.2 L)
- Max. lift height to bucket pin
- 11 ft 10.5 in (6,187 mm)
- Dump height fully raised
- 9 ft 3.3 in (2,828 mm)
- Max. reach fully raised
- 2 ft 8.2 in (820 mm)
- Dump angle
- 45°
- Rollback angle
- 48°
- Overall length with bucket
- 20 ft 5.2 in (6,230 mm)
- Overall height
- 9 ft 7.4 in (2,932 mm)
- Overall operating height
- 13 ft 10.0 in (4,220 mm)
- Bucket clearance height
- 9 ft 11.0 in (3,025 mm)
- Wheel base
- 8 ft 2.4 in (2,500 mm)
- Ground clearance
- 1 ft 9.2 in (540 mm)
- Overall width without bucket
- 7 ft 1.8 in (2,180 mm)
- Outside turning radius
- 15 ft 1.4 in (4,610 mm)
- Inside turning radius
- 7 ft 10.0 in (2,385 mm)
- Recommended bucket width
- 95.0 in (2,413 mm)
- Category
- Wheel Loaders in Colorado
- Subcategory
- Takeuchi
- Listing ID
- 100208034
Description
TAKEUCHI TW95 — WHEEL LOADER
Powerful and efficient, the Takeuchi TW95 delivers exceptional performance, comfort, and serviceability. It is an ideal loader for a wide range of applications including load and carry, snow removal, and feedlots. The cabin is spacious and features a deluxe high-back air ride seat with heat and armrest, single lever joystick control for all loader functions and directional changes (F-N-R), a proportional thumb wheel for auxiliary hydraulic functions, and rocker switches to control a wide range of machine functions. A standard hydraulic quick coupler makes changing attachments quick and efficient.
The TW95 is powered by a 114 hp, Deutz TCD 3.6 L4 engine that is Final Tier 4 using an SCR and DOC exhaust after treatment system. The hydrostatic drive is responsive and delivers excellent power for loading applications, and it also provides dynamic braking, slowing the loader as the operator backs off the throttle. High-speed road gear is standard equipment and enables the loader to travel at speeds up to 24.8 mph for greater mobility and versatility. 100% locking differentials can be engaged at low speeds to provide maximum tractive effort in the most demanding conditions. Maintenance and inspections are simple to perform on the TW95 due to the wide opening engine hood that provides access to key daily inspection points.
FEATURES
ENGINE
• EPA Final Tier 4 Emission Compliant
• DOC / SCR Exhaust After Treatment
• Turbocharged
• Water Cooled
• Dual Element Air Cleaner with Restriction Indicator
• High Capacity Radiator
ELECTRICAL
• Multi-Informational Monitor
• 12-volt System with 95 amp Alternator
• Work Lights: Front and Rear
• Driving Lights and Turn Signals
• Directional Lights: Fwd / Rev
• Engine Preheat
• Back-up Alarm
DRIVE TRAIN
• Hydrostatic Drive with 100% Inching Pedal
• 100% Locking Differentials: Front and Rear
• Outboard Planetary Drives
• 2 Speed Travel
• Spring Applied Parking Brake
• Multi-Wet Disc Brake
• High Speed Road Gear with Ride Control (24.9 mph)
• Heavy Duty Radial Tire Assembly (optional)
HYDRAULIC & WORKING EQUIPMENT
• Precise and Responsive Pilot Controls
• Proportional Thumb Wheel Located in Loader Joystick for Auxiliary Hydraulic Circuit
• Auxiliary Hydraulic Lines Plumbed to End of Loader Arms
• Auxiliary Hydraulic Detent
• Hydraulic Oil Level Sight Gauge
• High Capacity Hydraulic Oil Cooler
• Auxiliary Hydraulics (26.4 gpm)
• Z-Bar Linkage
• Bucket Float Function
• Mechanical Bucket Positioning
• Heavy Duty Hydraulic Bucket Quick Coupler
• Heavy Duty Self Aligning Loader Bushings with Oversized Pins
• 95" GP Bucket (2.00 yd3) (optional)
• 95" Light Duty Bucket w/ BOE (2.75 yd3)
• 95" Light Duty Bucket (8 tooth) (2.62 yd3) (optional)
• HD 48" Pallet Forks and Frame (optional)
OPERATOR'S STATION
• Enclosed Cab with Air Conditioning, Heat, Front and Rear Wipers, Front and Rear Washers, and Rear Defrost
• ROPS / FOPS Protection
• 2" Retractable Seat Belt
• Deluxe Air Suspension Seat with Heat
• Large Steps and Grab Handles
• Elevated Operator's Station
• Multi-Functional Joystick for Machine Direction, Bucket Control, Loader Arms, Diff Lock, High Speed, and Auxiliary Controls
• 3" Retractable Seat Belt (optional)
FOUR PILLARS OF TAKEUCHI EQUIPMENT
The Takeuchi design philosophy is centered on Four Pillars: Performance, Durability, Operator Comfort, and Serviceability. The engineering focus of Takeuchi is to build machine to the highest standards of quality and performance. Takeuchi strives to build equipment that incorporates solutions into each and every component and feature.
PERFORMANCE
The Takeuchi full product line up is rugged, dependable and productive. Takeuchi equipment provides exceptional value, demonstrates outstanding performance, and measured by their longevity in the field. flotation.
DURABILITY
Durability is a cornerstone to the success of our Takeuchi equipment. Takeuchi manufactures equipment that provides less downtime and high resale values. Attention to detail along with quality parts is why Takeuchi has a reputation for providing highly reliable products.
OPERATOR COMFORT
Takeuchi builds equipment with the operator in mind. Takeuchi believes that large roomy cabs with an intuitive layout with placement of monitors, switches and controls are essential in providing the highest quality of comfort while operating equipment.
SERVICEABILITY
Each Takeuchi is designed to simplify service access reducing downtime and saving you valuable time and money. Every Takeuchi comes standard with a 2 year / 2,000 hour full machine warranty providing additional value and peace of mind.
Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.