Large Versatile Roll To Roll Pilot Coating Machine with Continuous and Intermittent Modes in Dongguan, Guangdong, China
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Payment
- L/C,T/T,Western Union, Paypal
- Product origin
- China
- Shipping port
- Xiamen
- Certificate
- CE ROHS Certificate
- Working voltage
- 110 - 240 VAC, 50/60 Hz, three Phase (380VAC three phase is available upon request)
- Max. power consumption
- 30-35 KW ( 50A Air breaker required )
- Compressed air
- 0.5-0.9 MPa is required (Air compressor not included. Attention: If a gas cylinder is used instead of air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. pic1 pic2
- Reeling/unreeling diameter
- 350mm O.D Max. Reeling/Unreeling shaft diameter: 3 inches
- Coating width
- 350mm Max.
- Coating speed
- Max.5000mm/min
- Reverse comma blade (transfer coating)
- Two available coating modes (continuous and intermittent) selectable on the control panel. Coating thickness range: 30~200um ( dried film ) Typical slurry viscosity range: 500~10000 mPa.s Precision: ±3μm; Edge to center thickness tolerance +/-5um MSK-155 auto-slurry feeder with 2 liters tank is available at extra cost, please click underline to view details.
- Cast coating
- Tape casting technique is ideal for handling thicker slurry 5000~20000 mPa.s and thus thicker film coating is achievable (up to 1000um) Continuous coating mode only Precision: ±5μm (gap adjustment solution 1um); Edge to center thickness tolerance +/-8um MSK-156 slurry feeding screw pump with 4 liters tank is included, please click underline to view details
- Slot die coating
- The slot die is perfect for uniform film coating of 1 micron and up to 200-micron thickness. By changing the shim size with various patterns, you would be able to produce continuous, intermittent, or even grid coatings that match the shim patterns. Please refer to the pictures in below for more details: Slurry feeding screw pump with 4 liters tank is included, please click underline to view details Minimum thickness & precision: 1 µm ( dried film ), ±1% Typical slurry viscosity range: 200~10000 mPa.s Attention: The final coating thickness is dependent on a wide range of parameters such as slurry viscosity, solid particle size, solid content, shim thickness, foil rolling speed and slurry feeding rate. Therefore, we are not able to guarantee that 1-micron level film is achievable for all kinds of slurries. For further discussion, please let us know your slurry specs and coating thickness requirement.
- Micro-gravure coating
- Continuous and intermittent coating modes are available for the user. Coating thickness range: 1~3um ( dried film ) Typical slurry viscosity range: 30~1000 mPa.s auto-slurry feeder with 2 liters tank is included
- Convection drying oven
- Three zone design with independent temperature controllers. Air flow rate:9.5/2800 ( cm³/RPM ) max. for a single zone, flow rate adjustable Drying temperature: 150°C max ±5℃ Power Consumption: 9KW for single zone (27KW total) Heater length: 1.5m for single zone (4.5m total)
- Product dimensions
- L6800mm x W1200mm x H1900mm
- Compliance
- CE Certified
- Application notes
- Customers are welcome to visit our facility to receive technical training before shipping of equipment
- Net weight
- 13t
- Subcategory
- Electrode coating machine
- Subcategory 2
- Lithium battery assembly machine
- Listing ID
- 100827466
Description
Large Versatile Roll To Roll Pilot Coating Machine with Continuous and Intermittent Modes
TMAX-AFA-MC400 is a versatile roll to roll coating system which can adapt various coating heads such as reverse comma blade, Doctor Blade, Slot Die and Micro Gravure and Tape Casting. A 4.5 meters long, three zone convection drying oven with independent temperature programming is implemented for efficient slurry curing. This is the most complete and universal pilot coating system that provides a broad adaptability to various coating slurries and film substrates (Cu, Al, PET, PP, PE).
Doctor Blade: Cost effective solution for 8~200 micron thick coatings (Continuous mode only)
Reverse Comma Blade (Transfer Coating): Cost effective solution for 30~200 micron thick coatings (Both continuous & intermittence mode)
Tape Cast Coating: Ideal for performing thicker coating up to 1000 microns with high viscosity slurry
Services offered by seller
This seller offers spare parts
This Seller offers repair & maintenance services
This seller offers transport & logistics
This seller offers new machines
This Seller offers consultancy services
This seller can help you plan & execute entire projects
This seller offers on-site assembly and disassembly