NEW SHARP SV-2517SE-F BOX WAY CNC VERTICAL MACHINING CENTER in Bannockburn, IL, USA
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Stock number
- 14635
- Box way vertical machining center
- SV-2517SE-F
- Travel x,y,z
- 25.2" x 17.1" x 18.1
- Spindle nose to table
- 3.1 - 21.2 (S-F, SE-F)
- Spindle center to column
- 19.3"
- Table area
- 27.5" x 16.5"
- Spindle taper
- CAT 40
- Spindle max. speed
- 8,000 rpm
- Driving type
- Belt Drive
- Motor (30m/cont.)
- 10 / 15 HP (7.5 / 11 kw)
- Magazine type
- Side Mount
- Magazine capacity
- 24
- Max. tool diameter
- 3.9"
- W/o adj. tool, max dia.
- 5.9" (150mm)
- Max tool weight
- 15.4 lbs (7kg)
- Air blast at tool change
- Standard
- Cutting feed rate
- 0.04 - 393.7 IPM
- Rapid traverse
- X / Y / Z: 787 IPM
- Positioning accuracy
- 0.00016 "
- Repeatability accuracy
- 0.00012 "
- Controller
- Fanuc Oi-MF
- Programming assist
- Manual Guide
- 4th axis support
- Standard
- Screen size
- 8.4 LCD
- Flood coolant nozzles
- 2
- Coolant tank capacity
- 42 gal.
- Chip pan
- Standard
- Electrical
- 220V/3 Phase/20 KVA/60 Hz
- Air
- 6 CFM @ 88 psi
- Floor space
- 80" x 87"
- Height
- 99"
- Door opening
- 28.4"
- Weight
- 8200 Lbs
- Category
- Machining Centers in USA
- Subcategory
- Machining centers, vertical
- Listing ID
- 101588445
Description
NEW SHARP SV-2517S-F BOX WAY CNC VERTICAL MACHINING CENTER
25” x 17” x 18” travel
Hardened and ground Box ways with TURCITE coating
8,000 rpm, CAT 40 spindle
16 tools carousel type ATC
Fanuc Oi-MF control panel with embedded Ethernet, RS232 port, USB port and Flash Drive port. (standard)
Pre-tensioned, double anchored, ball screws mounted on high precision angular contact bearings (ABEC 7), eliminate chatter and vibrations during heavy cutting.
Vertical head is equipped with 2 adjustable coolant nozzles, one adjustable air nozzle, 4 coolant openings and 4 air curtain openings under the spindle. There is also the air purge system that blows out chips at each tool change (standard)
Chip wash nozzles are installed at each side of machine base (standard)
Rigid taping, auto lube, thermal control system, coolant gun, air gun, interlock doors (standard)
Machine wt. 8,200 lbs
STANDARD ACCESSORIES
Fanuc Oi-mate-MF control and drives with ;