1771-IFE/C | Analog input module in Fujian, China
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Dimensions
- 2.2 cm x 12.4 cm x 12.6 cm
- Weight
- 0.1 kg
- Mfr. part number
- 1771-IFE/C
- Part number/catalog no.
- 1771-IFE
- Module type
- Analog Input
- I/o
- 8 Differential or 16 Single-Ended
- Chassis compatibility
- Any chassis
- Channel update/resolution
- 18 milliseconds/8; 36 milliseconds/16
- Data format
- Natural Binary or BDC Scaling to +/- 9999
- Resolution
- 12-bit binary; 12 bits plus sign on bipolar ranges
- Accuracy
- 0.1% of full scale range @ 25oC
- Internal scan rate
- 12.5 ms for 8 differential inputs (no digital filtering) -add 2.12ms for filtering 25 ms for 16 single-ended input (no digital filtering) -add 4.24 for filtering
- External power required
- No
- Voltage range
- -10 to 10 Volts DC
- Current range
- -20 to 20 mA
- Typical dc signal delay (on)
- 10 milliseconds
- Wiring arm
- 1771-WG
- Backplane current
- 750 miliAmperes External
- Typical ac signal delay (off)
- 24 milliseconds
- Typical dc signal delay (off)
- 20 milliseconds
- Mounting
- Rack Mountable
- Category
- Input/Output Modules in China
- Subcategory
- Plc
- Subcategory 2
- Control system components
- Listing ID
- 101652237
Description
1771-IFE/C Analog input module
1771-IFE/C Analog input module The 1771-IFE is a PLC5 analog input module that is compatible for installation with any 1771 I/O chassis.
The 1771-IFE is a PLC5 analog input module that is compatible for installation with any 1771 I/O chassis. This module has Sixteen (16) Single-eneded channels or Eight (8) Differential input channels. Each channel are configurable for input Voltage and Current signal ranges of 1 to 5V dc, 0 to 5V dc, -5 to +5V, -10 to +10V dc, 0 to 10V dc, 4 to 20mA, 0 to 20mA, and 20 to +20mA. This module is used with Block transfer instructions such as BTW and BTR for sending and receiving analog data and instructions.
The 1771-IFE is a PLC5 Analog Input Module. This module interfaces analog inputs with PLC processors using block transfer programming. It uses a 16-bit resolution and performs the required analog-to-digital conversions and vice versa to interface analog signals with PLC data table values.