18 Motor Grader in Newington, CT, USA
New
Specifications
- Condition
- new
- Base power (1st gear) – net
- 238 hp
- Engine model
- Cat® C13
- Bore
- 5.1in
- Stroke
- 6.2in
- Speed at rated power
- 2,000 rpm
- Optimized vhp range – net
- 227-266 kW (304-357 hp)
- Standard – ambient capability
- 122°F
- Base power (1st gear) – net – metric
- 309hp
- Vhp range – net
- 227-266 kW (304-357 hp)
- Maximum torque – iso 9249 – tier 2/stage ii/japan 2001 (tier 2) equivalent
- 1270lb/ft
- Derating altitude – tier 2/stage ii/japan 2001 (tier 2) equivalent
- 12176ft
- Derating altitude – tier 3/stage iiia/japan 2006 (tier 3) equivalent
- 12973ft
- Maximum torque – iso 9249 – tier 3/stage iiia/japan 2006 (tier 3) equivalent
- 1270lb/ft
- Standard – fan speed – minimum
- 550 rpm
- Emissions (1)
- U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final)
- Torque rise – tier 4/stage iv/japan 2014 (tier 4 final)
- 40%
- Maximum torque – iso 9249 – tier 4/stage iv/japan 2014 (tier 4 final)
- 1306lb/ft
- Derating altitude – tier 4/stage iv/japan 2014 (tier 4 final)
- 12500ft
- Torque rise – tier 2/stage ii/japan 2001 (tier 2) equivalent
- 38%
- Standard – fan speed – maximum
- 1,450 rpm
- Emissions (2)
- Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards
- Torque rise – tier 3/stage iiia/japan 2006 (tier 3) equivalent
- 38%
- Vhp range – net – metric
- 227-266 kW (309-362 hp)
- Emissions (3)
- Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards
- Displacement
- 763in³
- Number of cylinders
- 6
- Operating weight – typically equipped
- 57250 lb
- Blade width
- 14 ft
- Arc radius
- 16.3in
- Throat clearance
- 5in
- Note
- Calculated with no slip and 23.5R25 L-3 tires.
- Down force – maximum gvw
- 43861lb
- Blade pull* – base gvw
- 47216lb
- Blade pull* – maximum gvw
- 52878lb
- End bit – width
- 6in
- Down force – base gvw
- 34008lb
- Cutting edge thickness
- 1.4in
- Thickness
- 1in
- Width
- 9.3in
- Cutting edge width
- 10in
- End bit – thickness
- 0.75in
- Height
- 25.5in
- Fuel capacity
- 131gal (US)
- Cooling system
- 18.5gal (US)
- Hydraulic system – tank
- 18.5gal (US)
- Hydraulic system – total
- 38.6gal (US)
- Def tank
- 4.2gal (US)
- Engine oil
- 9.5gal (US)
- Transmission – differential – final drives
- 26gal (US)
- Tandem housing – each
- 34gal (US)
- Front wheel spindle bearing housing
- 0.24gal (US)
- Circle drive housing
- 2.6gal (US)
- Forward/reverse gears
- 8 Forward/6 Reverse
- Transmission
- Direct drive, power shift, countershaft
- Brakes – parking
- Spring applied, hydraulically released
- Brakes – dynamic brake torque per wheel
- 27069.27lb/ft
- Brakes – service
- Oil-actuated, oil disc
- Brakes – secondary
- Oil-actuated, oil-disc
- Circuit type
- Electro-hydraulic load sensing, closed center
- Pump type
- Variable piston
- Maximum system pressure
- 3590psi
- Standby pressure
- 856psi
- Pump output*
- 74gpm
- Maximum blade position angle
- 65°
- Maximum lift above ground
- 15.7in
- Maximum depth of cut
- 18.5in
- Moldboard sideshift – right
- 31.1in
- Blade tip range – backward
- 5°
- Moldboard sideshift – left
- 29.1in
- Circle centershift – left
- 27.2in
- Blade tip range – forward
- 40°
- Maximum shoulder reach outside of tires – right
- 103in
- Circle centershift – right
- 22in
- Maximum shoulder reach outside of tires – left
- 103in
- Shank holder spacing – minimum
- 17.5in
- Ripping depth – maximum
- 17.8in
- Shank holder spacing – maximum
- 20in
- Ripper shank holders
- 7
- Penetration force
- 30311lb
- Pry-out force
- 43700lb
- Machine length increase, beam raised
- 63.4in
- Gross vehicle weight – typically equipped – rear axle
- 53830lb
- Gross vehicle weight – base** – total
- 72298lb
- Gross vehicle weight – maximum tested – rear axle
- 58753lb
- Gross vehicle weight – maximum tested – front axle
- 26125lb
- Gross vehicle weight – typically equipped – front axle
- 20494lb
- Gross vehicle weight – base** – front axle
- 19837lb
- Gross vehicle weight – maximum tested – total
- 84877lb
- Gross vehicle weight – typically equipped – total
- 74324lb
- Gross vehicle weight – base** – rear axle
- 52461lb
- Note (2)
- **Base operating weight calculated on standard machine configuration with 23.5R25 tires, full fuel tank operator and rops cab.
- Note (1)
- *No Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission engine: subtract 150 kg (331 lb) from rear axle wt. & total wt.
- Height – top of cylinders
- 122.6in
- Width – outside rear tires
- 134.3in
- Height – exhaust stack
- 141.1in
- Length – between tandem axles
- 72.5in
- Length – front axle to mid tandem
- 290in
- Width – tire center lines
- 106.4in
- Length – front axle to moldboard
- 120.7in
- Length – counterweight to ripper
- 474.4in
- Height – front axle center
- 29.9in
- Width – outside front tires
- 134.3in
- Length – front tire to rear of machine – including tow hitch
- 417in
- Height – top of cab
- 147.5in
- Ground clearance – rear axle
- 16.7in
- Sound
- ISO 6394: 2008/ISO 6395: 2008/ISO 6396: 2008
- Rops/fops
- ISO 3471: 2008/ISO 3449: 2005
- Brakes
- ISO 3450: 2011
- Gear – forward 1st
- 304hp
- Gear – forward 2nd
- 304hp
- Gear – reverse 2nd
- 304hp
- Gear – forward 4th
- 321hp
- Gear – forward 6th
- 337hp
- Gear – forward 5th
- 327hp
- Gear – forward 8th
- 357hp
- Gear – reverse 1st
- 304hp
- Gear – forward 3rd
- 311hp
- Gear – forward 7th
- 342hp
- Gear – reverse 3rd-6th
- 311hp
- Wheel group – 19.5×25 mp (2)
- Tires: 23.5R25 Bridgestone VKT 1 Star
- Wheel group – 19.5×25 mp (1)
- Tires: 23.5R25 Bridgestone VKT 2 Star
- Wheel group – 19.5×25 mp (3)
- Tires: 23.5R25 Bridgestone VJT 1 Star
- Wheel group – 19.5×25 mp (4)
- Tires: 23.5R25 Michelin XHA 2 Star
- Wheel group – 19.5×25 mp (5)
- Tires: 23.5R25 Michelin XLDD 2 Star L5
- Forward – 6th
- 16mile/h
- Forward – 2nd
- 3.8mile/h
- Forward – 8th
- 32.1mile/h
- Forward – 5th
- 11.8mile/h
- Reverse – 3rd
- 6mile/h
- Turning radius – outside front tires
- 30.5ft
- Forward – 4th
- 7.6mile/h
- Top speed – reverse
- 25.3mile/h
- Forward – 7th
- 22mile/h
- Articulation angle – left/right
- 20°
- Reverse – 1st
- 2.2mile/h
- Forward – 3rd
- 5.5mile/h
- Reverse – 4th
- 9.3mile/h
- Forward – 1st
- 2.8mile/h
- Top speed – forward
- 32.1mile/h
- Reverse – 6th
- 25.3mile/h
- Steering range – left/right
- 47.5°
- Reverse – 2nd
- 4.1mile/h
- Reverse – 5th
- 17.4mile/h
- Front frame structure – width
- 14in
- Front axle – height to center
- 26.4in
- Circle – diameter
- 71.7in
- Front frame structure – thickness
- 0.6in
- Front frame structure – height
- 18.1in
- Circle – blade beam thickness
- 2in
- Drawbar – width
- 3in
- Front axle – wheel lean
- 18° Left/17° Right
- Front axle – total oscillation per side
- 35°
- Drawbar – height
- 8in
- Sidewall thickness – outer
- 0.9in
- Sidewall thickness – inner
- 0.9in
- Tandem oscillation – front up
- 15°
- Tandem oscillation – front down
- 25°
- Drive chain pitch
- 2.5in
- Wheel axle spacing
- 72.5in
- Air conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. – If equipped with R134a (Global Warming Potential = 1430), the system con
- Net power range (tier 4)
- 179 hp
- Category
- Motor Graders in Connecticut
- Listing ID
- 102384145
Description
Contact the seller for more information about this listings.