IS220PSCAH1A Serial Communication Input/Output Module in Xiamen, Fujian, China
New
Specifications
- Condition
- new
- Stock number
- IS220PSCAH1A
- Baud rate
- Select the appropriate baud rate (such as 9600, 19200, etc.).
- Data bit
- Usually 8 bits.
- Stop bit
- Select 1 bit or 2 bits.
- Parity bit
- Select no parity, odd parity, or even parity.
- Category
- Input/Output Modules in China
- Subcategory
- Ge
- Subcategory 2
- Plc system
- Listing ID
- 102902287
Description
IS220PSCAH1A Serial Communication Input/Output Module
Configuring the serial communication channel of the IS220PSCAH1A module generally involves the following steps:
1. Hardware connection
Make sure the module is properly installed in the control system.
Connect the RS485, RS232, or RS422 device to the corresponding port of the module.
2. Access the configuration software
Use the control system configuration software provided by GE (such as ControlST) to access the configuration interface of the module.
3. Select the serial communication channel
Find the IS220PSCAH1A module in the software.
Select the serial communication channel to be configured (up to six channels can be configured).
4. Set the communication parameters
5. Configure the device address
If using the Modbus protocol, set the address of the slave device (such as 1-247).
6. Save Configuration
After completing all settings, save the configuration and download it to the module.
7. Test Communication