GMC GML-26120T 26 x 120 in Heavy Duty Precision Gap Bed Lathe in Dover, DE, USA
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Stock number
- GML-26120T
- Shipping
- Free Shipping
- Max. swing over bed
- 26”
- Max. length of workpiece
- 120”
- Max. swing over cross slide
- 17-1/4”
- Max. swing in gap
- 35”
- Width of bed
- 15-3/4”
- Effective length in gap to spindle
- 9”
- Effective length in gap to chuck jaws
- 4-1/2”
- Spindle bore
- 4-3/4” (120mm), D1-11
- Taper of spindle center
- MT# 7/MT5 with reducing sleeve
- Spindle speeds
- 10-1,000 rpm / 12 steps
- Longitudinal feeds
- 0.002-0.032 IPR, 35 kinds
- Cross feeds
- 0.001-0.0094IPR, 35 kinds
- Inch threads
- 2-56 TPI, 44 kinds
- Metric threads
- 0.5-14mm , 24 kinds
- Max. travel of top slide
- 8”
- Max. travel of cross slide
- 13-1/2”
- Lead screw length x tpi
- 1-1/2” x 4 TPI
- Diameter of tailstock quill
- 3-1/2”
- Max. travel of tailstock quill
- 7-1/2”
- Taper of tailstock quill center
- M.T. # 5
- Main motor amperage draw
- 15 HP, 220V or 440V, 3 phase 55 Amp on 220V / 30 Amp on 440V
- Rapid traverse motor
- 1HP, 220V or 440V, 3 phase
- Coolant pump motor
- 1/8 HP, 220V, or 440V, 3 phase, 3 Gal coolant fluid
- Machine oil
- #30 weight machine oil, 8 Gallons
- Machine weight, approx. lbs
- 8,590 LBS
- Overall dimensions, l x w x h, inch
- 186 x 50 x 73
- Shipping dimensions, l x w x h, inch
- 191 x 44 x 77
- Category
- Heavy Duty Lathes in USA
- Subcategory
- Lathes
- Subcategory 2
- Metalworking
- Listing ID
- 104148545
Description
GMC GML-26120T 26 x 120 in Heavy Duty Precision Gap Bed Lathe
Features
Meehanite casting – high performance cast iron.
ISO 9001 certified.
Large spindle bore 4-3/4” (120mm).
Heavy Duty spindle D1-11.
Heavy Duty main motor 15HP.
16 spindle speeds from 10-1,000 rpm, 12 speeds.
2-speed tailstock.
54 kinds of inch threads, and 54 kinds of metric threads.
Threading and feeding rate change without changing gears.
Spindle is balanced, hardened and precision ground.
Spindle is supported at 3-point by high precision bearings.
All gears and shafts are hardened and precision ground.
Guideways induction hardened and precision ground.
Automatic lubrication system in headstock and feed box.
Standard Equipment
Free CARMAR DRO, installed.
Rapid traverse on carriage on Longitudinal way.
Automatic kick-out longitudinal carriage stop system.
2-speed tailstock.
12” 3-jaw chuck with top reversible jaws, direct mount.
20” Face plate.
12” steady rest with roller jaws.
5” follow rest with roller jaws.
$48,850 USD