Waters Acquity UPLC System with 2996 PDA Detector, Sample Manager and Binary Solvent Manager in Markham, Ontario, Canada

Specifications

Condition
refurbished
Stock number
0SY-Waters-0480
Wavelength range
190 to 800 nm
Light source
Prealigned, Deuterium lamp
Spectral resolution/optical bandpass
1.2 nm per photodiode with a total of 512 photodiodes, digital and optical (3D-mode)
Digital resolution
1.2 nm – 600 nm (2D mode)
Wavelength accuracy
±1 nm
Linearity range
5% at 2.0 AU, propylparaben, at 256 nm
Spectral resolution
1.2 nm
Baseline noise
±1.5 × 10–5 AU peak-to-peak, dry, at 254 nm
Drift
1 × 10–3 AU/hour at 254 nm (after warm-up) ∆T ≤ 1°C per hour
Operation temperature
4 to 40 °C (39 to 104 °F), not to vary more than 1 °C per hour (to prevent drift)
Relative humidity
20 to 80%, noncondensing
Power
Grounded ac, 100 to 240 Vac
Power requirements
100-230 VAC
Frequency range
50 to 60 Hz
Path length
10 mm (standard analytical cell)
Cell volume
8 µl (standard analytical cell)
Pressure limit
1000 psi (standard analytical cell)
Wetted materials
316 stainless steel, fused silica Tefzel
Dimensions
Width: 11.5 in. (29 cm) Depth: 24 in. (61 cm) Height: 8.5 in. (22 cm)
Weight
31.5 lbs (14.3 kg)
Injection volume range
0.1 to 10.0 µL as standard configuration Up to 1000.0 µL with optional extension loop
Accuracy
+0.2 µL, measured by fluid weight removed from vial with 10.0 µL injections averaged over 20 injections using standard 100-µL syringe
Injection linearity
>0.999 (See ACQUITY UPLC I-Class system specification document for conditions)
Maximum sample capacity
Any two of the following: 96 and 384 microtiter plates 48 position 2.00 mL vial plates 48 position 0.65 mL micro-centrifuge tube plates 24 position 1.50 mL micro-centrifuge tube plates
Sample compartment temperature range
4.0 to 40.0°C Settable in 0.1°C increments Maintains 19°C below ambient with a tolerance range between -2 and 4°C
Temperature accuracy
+0.5°C at sensor
Temperature stability
+1.0°C at sensor
Injection needle wash
Integrated, active, programmable
Minimum sample required
3µL residual, using Waters’ total recovery 2-mL vials
Carryover (uv)
<0.004% <0.001% typical
Advanced sample manager capabilities
Auto-dilution and auto-addition
Primary wetted materials
316L stainless steel UHMWPE blend MP35N Titanium alloy Gold Sapphire Ruby Zirconia Nitronic 60 DLC Fluoropolymer PEEK and PEEK blend 316L stainless steel, UHMWPE blend, MP35N, titanium alloy, gold, sapphire, ruby, zirconia, Nitronic 60, DLC, fluoropolymer, PEEK and PEEK blend
Number of solvents
Up to four, in combination of two, A1 or A2 and B1 or B2
Solvent conditioning
Integrated vacuum degassing, six lines with two allocated for the injector needle wash/purge solvents
Gradient formation
High pressure mixing, binary gradient
Gradient profiles
11 gradient curve [ including linear, step (2), concave (4), and convex (4)]
Primary check valves
Intelligent Intake Valves
Flow accuracy
+1.0% of set flow rate at 0.500 mL/min, as per SystemsQT
Flow precision
0.075% RSD or 0.01 min SD, (0.2 to 2.0 mL/min), whichever is greater using premixed solvent
Composition ripple (baseline noise)
<1.0 mAu
Pump compositional precision
<0.2% RSD, or 0.02 min SD, whichever is greater (from 0.2 to 2.0 mL/min)
Pump compositional accuracy
+0.5% absolute from 5% to 95%, 0.2 to 2.0 mL/min
Compressibility compensation
Automatic, no user intervention required
Priming
Wet priming runs at a flow rate of 4 mL/min
Pump seal wash
Equipped with a programmable active wash system to flush the rear of the high pressure seals and the plungers
Flow ramping
Automatic
Mixing options
Standard: 50 µL Optional: 100 µL and 380 µL
Subcategory
Waters hplc
Subcategory 2
Waters systems
Listing ID
28260076

Description

Waters 2996 PDA Detector
Waters Sample Manager
Waters Binary Solvent manager

Services offered by seller

This Seller offers repair & maintenance services

This seller offers spare parts

Seller Reviews

07/03/2025

We are very happy with the seller for this purchase. Specially happy that they can stick to the quote pricing without adding additional cost such as tariff, handling, etc.

08/03/2022

Excellent service, top quality equipment.

06/27/2022

Seller is flexible in system configuration and is cooperative to customer's needs

12/21/2021

Very knowledgable and listened to the customer about budget and needs

Contact Seller for Price

Manufacturer
Waters
Model
Acquity
Type
High-Performance Liquid Chromatography (HPLC)
Location
🇨🇦 Markham, Ontario, Canada

Interested in this machine?

This seller has been contacted 13 times in the last week.

Trusted Seller

4.75

Seller languages

Get Financing

Our financing partner can help you get fast, easy, and affordable financing for your equipment purchase