Blast cabin SU-120/120/114 Side door+slide+turntable in Álava, Spain

Three-phase power supply 380V 50Hz
Equipped with the following COMPONENTS:
Bottom in the shape of an inverted pyramid trunk in the lower part of which the abrasive absorption device is placed.
A rotating plate, mounted on a trolley with wheels for its displacement to the outside on guides.
Interior lighting by means of two lamps protected by hermetically sealed lampshades.
Observation window with interchangeable safety glass mounted on a completely watertight rubber frame.
SIDE DOOR for loading / unloading of parts.
Perforated platform duly reinforced to support the parts to be treated.
Two openings with conical sleeves and gloves adapted to them for the operator's hands, located at the front of the cabin.
An outlet for suction of the dust produced inside the booth with a butterfly valve for regulation.
A MODEL 750 spray gun, equipped with a 7 mm widia nozzle.
Set of hoses for the passage of compressed air and abrasive to the gun.
A blowing gun to remove the remains of abrasive or dust from the treated parts.
A set of filter, pressure gauge and pressure regulator for purification and regulation of the compressed air.
A foot valve to control the air flow to the spray gun.
Extraordinarily effective for the application of light to medium abrasives such as:
Glass beads
Ground glass
Corundum
Sand and silica
Vegetable husks
Ground slag
The dust-laden air is drawn into the dust collector. There it passes through the filter cartridge, where the dust and abrasive particles are deposited on the outer walls of the cartridges, and the clean air passes through the fan and is discharged to the outside.
The particles collected on the filter elements of the collector are periodically removed by injecting compressed air into the interior of the cartridge (cellulose microfiber). When the air is injected, the dust falls to the bottom of the hopper and is deposited in a container for later disposal.