2-story corrugated iron rolling machine - Arch stamping - Square wave | Wave circles | Laphong waves in Ho Chi Minh City, Vietnam
Used
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- used
- Dimensions (d x r x c)
- 12000 mm x 1800 mm x 1500 mm
- Weight / kg)
- 11500 Kg (Weight may vary according to profile and number of shaft pairs)
- Productivity / speed (m / p)
- 18 m / p ÷ 22 m / p (Or faster depending on request)
- Chassis
- I # 396
- Machine wall (mm)
- 20 mm
- Cutting board
- Specialized steel 1050 from Japan - Germany, knife durable over 5 years (Use correct maintenance techniques according to the supplier's instructions)
- Roller diameter (mm)
- Ø70 mm
- Fling on (optional according to need)
- - 5 Square waves - 6 Square waves - 7 Square waves - 9 Square waves - 11 Square waves - 14.5 Round waves
- Lower pitch
- - 13 Laphong waves
- Number of shaft pairs (optional according to need)
- - 5 Square waves: 18 Pair ÷ 20 Pair - 6 Square waves: 18 Pair ÷ 20 Pair - 7 Square waves: 22 Pairs - 9 Square waves: 22 Pairs - 11 Square waves: 22 Pairs - 13 Laphong waves: 22 pairs - 14.5 Waves: 25 Pairs
- Electric power (kw / hp)
- - Invertor type: 11 KW / 15 HP - Normal type: 5.5 KW / 7.5 HP
- Thickness of rolled sheet (mm)
- 0.25 mm ÷ 0.6 mm
- Thickness of stamping sheet (mm)
- 0.35 mm ÷ 0.5 mm (Standard of 90 degree curved arch stamping - 1 m long sheet -> 16 stamping => 18 stamping buttons)
- Corrugated iron (mm)
- 1200 mm
- Resources
- Cold iron, galvanized steel, colored galvanized steel
- Stiffness
- G300 - G550
- Type of invertor
- - Rolled layer: Drive by 5 Star oil motor 400 cc / v - Floor stamping metal dome: Drive by electric motor 7.5 HP + Gearbox
- Normal
- - Rolled layer: Drive by 5 Star oil motor 400 cc / v - Floor rolled metal dome stamping: Drive by 5 Star oil motor 400 cc / v
- Electric motor (hp)
- Hitachi / Teco - Japan / Taiwan
- Pump head (cm³ / v)
- 31 Cm³ / v
- Valve
- Hydraulic valve 03
- Cooling (fan)
- AH1012 (100 l / p)
- Oil pipe
- Yokohama / Japan
- Pressure gauge (kg / cm²)
- 250 Kg / cm²
- Hydraulic oil r32 (imported)
- 200L
- Cb source
- Fuji - Mitsu
- Relay against motor overload
- Have
- The source board
- Omron 24VDC
- Industrial controller (plc)
- Siemens - Germany
- Screen
- 7 Inch (Weintek - Taiwan)
- Relay shut off hydraulic valve
- Super durable contactor with load 10A - IDEC / Japan
- Bo rate control speed
- Are not
- Control cabinet
- Hanging cabinets
- Counter
- 360 Pulse
- Sirens
- 220VAC
- Lights
- 250VAC
- Wire
- Vietnam
- Flat cutter blade
- 1 Ben Ø80 x 150 ST
- Ben knife silhouette
- 1 Ben Ø80 x 150 ST
- Stamping ben
- 2 Ben Ø80 x 280 ST
- Ball bearing
- FBL / PBC / Net
- Chain
- Star - 80
- Button
- Anti-dust and mold super durable over 5 years (Idec - Japan)
- Cutter
- Japanese / German special steel, knife durable over 5 years. (Use correct maintenance techniques according to the supplier's instructions)
- Rolling batch
- Chromium
- Need electrical cabinets
- paint
- Rolling stocking tube (ø70 - ø112)
- Chromium
- Soup tube (ø76)
- paint
- Ty
- paint
- Yoke
- paint
- Front / rear roller
- Galvanized
- Front mask
- Galvanized
- Chain cover
- Painted steel
- Durability & machine uniformity
- The machine's equipment is manufactured in series from Japanese CNC lathes, milling, grinding, cutting machines and new automatic welding robot, imported 100% new ABB - Switzerland, Yaskawa.
- Safe in use
- The machine is programmed to automatically disconnect the valve when the trip limit switch failure occurs to ensure no mechanical damage or hydraulic seal tank, with emergency buttons both before and after to use. handling.
- Productivity and product quality
- Designing standards across many machines, coordinating with quality standards between machine manufacturers and customers using machines, surveying the reality of the works in use, so there is an optimal solution for each product. The sharp lamination lines do not get scratches, black marks when cold rolled iron like products of other suppliers
- Meet technical standards
- Closely inspecting and evaluating each stage of machine manufacture, always improving quality.
- Design upon request
- This is a standard product (Can be designed when there are specific requirements of customers)
- Category
- Processing equipment in Vietnam
- Subcategory
- Factory plant
- Listing ID
- 52697573
Description
1. The machine has 2 functions of rolling corrugated iron and stamping arch, so it saves initial investment costs and saves space for small factories or for civil use.
2. Integrate 2 types of waves in one machine (Square Wave | Round | Laphong + Square Wave | Round | Laphong)
3. The machine has a large rolling speed and high production efficiency, so users can save more time and still get the desired results.
4. The machine delivers high productivity, more products in less time.
5. Saving labor of workers: To make a piece of corrugated iron needs a lot of stages and meticulousness. Therefore, if it depends only on human power, the productivity will be very low. Meanwhile, when using a corrugated iron rolling machine, only 1-2 people need to operate the machine, but the product quality is still guaranteed.
6. Bring the lowest cost and price: This is because you don't have to pay to hire too many workers, time and productivity are always guaranteed...
1. The roof does not open the joints between the two panels when viewed from the bottom up, top down.
2.