-70℃ Thermal Shock Chamber machine Test Device in Xi'An, Shaanxi, China
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Place of origin
- China
- Certification
- CE RoHS ISO17025
- Name
- Thermal Shock Test Device
- Inner dimensions of test room (mm)
- 450*450*360
- Volume of test room (mm)
- 72L
- Load of test room
- 30kg
- Overall dimensions(mm)
- 1710*1020*1845
- Pre-heat room
- Upper limit preheat temperature
- Pre-cool room
- Lower limit pre-cool temperature
- Test room
- High temperature exposure range
- Recovery time
- Within 15 minutes
- Temperature fluctuation
- ≤±0.5℃
- Temperature deviation
- ≤±3 ℃
- Controller
- Programmable color LCD touch screen controller
- Cooling system
- Mechanical compression refrigeration system
- Refrigerating unit
- French TECUMSEH compressor
- Refrigerant
- R404A, R23
- Air circulation
- Centrifugal wind fan
- Exterior material
- Steel Plate with protective coating
- Interior material
- SUS304 stainless steel
- Power supply
- 380v, 50Hz
- Environmental conditional
- 5℃～+40 ℃ ≤85% R
- Basket the specimen automatic transferred from cold chamber to hot chamber by basket. the basket slides vertically and smoothly through rails, to make the specimen is exposed to the two chambers.
- Controller It can edit 100 programs 100 segments. LIB also can preset program into the controller based on user testing requirements. The set system language is English for standard
- Pre-high temp.
- +220℃
- Volume
- 160L, 210L, 500L, 1000L And More
- Cooling mode
- Air-cool Type
- Temperature range
- -70C To 150C
- High light
- -70C Thermal Shock Chamber, 72L Thermal Shock Chamber, -70C Thermal Shock Machine
- Category
- Environmental Chambers in China
- Subcategory
- Thermal shock chamber
- Listing ID
- 64359718
Description
LIB -70℃ Thermal Shock Test Device
Description
LIB -70℃ Thermal Shock Test Device is to check the behaviour of the product when it undergoes a thermal shock; in these cases, the sample may cool or heat up with different speeds in different parts depending on the material. If this corresponds to large increases or contraction in volume, the material could suffer large mechanical stresses, leading to failure.
As exposed to the rapid exchange of drastic hot and cold, the inner part of the tested sample, such as the metal material, will experience great temperature difference in the shortest time, thus triggering a large shock thermal stress. This phenomenon is called thermal shock.
Products Parameters
Design and Construction
Features
1.Air-to-air thermal shock test.(Air-to-water)
2.Refrigerate System( 2 sets of the compressor).
3.Insulation material ( polyurethane foam).
4.Temperature switch and recovery time can be controlled within 5 seconds.
5.