+220℃ Degree Thermal Shock Tester High Temperature in Xi'An, Shaanxi, China
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Place of origin
- China
- Certification
- CE RoHS ISO17025
- Name
- Thermal Shock Tester
- Inner dimensions of test room (mm)
- 450*450*360
- Volume of test room (mm)
- 72L
- Load of test room
- 30kg
- Overall dimensions(mm)
- 1710*1020*1845
- Pre-heat room
- Upper limit preheat temperature
- Pre-cool room
- Lower limit pre-cool temperature
- Test room
- High temperature exposure range
- Recovery time
- Within 15 minutes
- Temperature fluctuation
- ≤±0.5℃
- Temperature deviation
- ≤±3 ℃
- Controller
- Programmable color LCD touch screen controller
- Cooling system
- Mechanical compression refrigeration system
- Refrigerating unit
- French TECUMSEH compressor
- Refrigerant
- R404A, R23
- Air circulation
- Centrifugal wind fan
- Exterior material
- Steel Plate with protective coating
- Interior material
- SUS304 stainless steel
- Power supply
- 380v, 50Hz
- Environmental conditional
- 5℃～+40 ℃ ≤85% R
- Test area ◆test area is made of stainless-steel. ◆elevator type ◆basket displacement time less than 15 seconds ◆temperature resetting time less than 15 minutes ◆2 pieces of adjustable and removable shelves test hole, sealed with silicone screw plug
- Cable Hole ◆A standard test hole, located at top of the work room, is provided with a sleeve inside to prevent moisture from entering the insulation layer. Equipped with flange. ◆The standard inner hole diameter is 50mm. ◆Soft silicone plug seal; Metal enclosure closed, beautiful designed.
- Pre-high temp.
- +220℃
- Volume
- 160L, 210L, 500L, 1000L And More
- Cooling mode
- Air-cool Type
- Temperature range
- -70C To 150C
- High light
- 220 Degree Thermal Shock Tester, 220C Thermal Shock Tester, 220C thermal shock test equipment
- Category
- Environmental Chambers in China
- Subcategory
- Thermal shock chamber
- Listing ID
- 71191984
Description
+220℃ Degree High Temperature Thermal Shock Tester
Description
+220℃ Degree High Temperature Thermal Shock Tester is a necessary test equipment of material such as metal, plastic, rubber, electronics and so on, used for testing material structure or composite material. It can figure out the tolerance degree in the instantaneous continuous environment of extremely high temperature and extremely low temperature to know the chemical change or physical injury because of contraction principle at least time.
Products Parameters
Design and Construction
Features
1, Programmable LCD touch screen temperature controller,support multiple languages
2, Divided in high temperature zone,low temperature zone,and a basket
3, Water or air cooling
4, High & low temperature transfer time:within 15 seconds,temperature recovery time:3-5minutes
5, Using powerful air-to-air temperature cycle tester
6, Has hot and cold zones that can be controlled independently