Spark Test Machine in Shanghai, China
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- ·output voltage
- 0 ～15KV (RMS), sine wave;
- ·output voltage regulation range
- 0.1 ~ 15KV, 100V per adjustment;
- ·defect records
- up to 999 records;
- ·max diameter of cable
- 25mm;
- ·test frequency
- 2500 ~ 3500Hz, varying with the equivalent load capacitance;
- ·electrode
- beads-style, meet UL1581 standards;
- ·electrode length
- 50mm;
- ·test mode
- manual, automatic;
- ·automatic leak detection recovery time
- < 20ms;
- ·output current
- 4mA for resistive load, 40mA for capacitive load;
- ·max line speed allowed
- 3067m/min, meet BS5099 and CCC standards; 1000m/min, meet UL1581 and CSA standards;
- ·output relay's capacity
- 2A, 250VAC;
- ·serial communication
- RS232/422 optional;
- ·max communication distance
- 300m;
- ·power supply
- 200 ～ 240VAC, 50/60Hz;
- ·environmental temperature
- -5℃ ~ 50℃;
- ·relative humidity
- 20% ~ 85%;
- ·power consumption
- ≤150W;
- ·weight
- about 13 kg.
- Automatic mode
- breakdown counting, sound and light alarm, automatic reset, high pressure detection.
- Manual mode
- after the breakdown count, the acousto-optic alarm has been controlled and output is needed.
- Hot tags
- spark test machine, China, suppliers, manufacturers, factory, customized
- Subcategory
- Spark tester
- Listing ID
- 86784994
Description
TMAC 15HS leakage test instrument is suitable for online insulation leak testing in wire and cable industry.
high frequency spark tester for cable and wire
TMAC 15HS leakage test instrument is suitable for online insulation leak testing in wire and cable industry. It can detect invisible pinhole, air gap, defects, cracks in the insulation coating surface of wire and cable. Instruments can be connected to the PLC or computer via full duplex serial communication interface.
Performance
·The cover of electrode has safe lock;
Breakdown indication:
Safety interlock:
When the electrode box fire protection cover is opened, the high voltage is cut off automatically, and the high voltage electrode is grounded by the discharge needle to ensure the personal safety of the operator.
The external contact signal can control the low-voltage circuit to make the high voltage on and off.
Breakdown indication